Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
following on from this thread:
http://www.corsasport.co.uk/board/viewthread.php?tid=347305
both myself and mantamark have decided to work together on it as its easier for us to accept payments and carry stock and do designs etc... from Vsport. also the initial outlay is reather high to get them made.
kits will be available in the following options:
1. front doorcards only £90
2. front, rear and bootlid cards £145
they will be totally flat sheets, they will be a direct replacement for standard doorcards and rear 1/4 cards. suitable for stripped cars. holes will be cut for the door handles but not for window winders/switches but this is easy to diy. they will not have any door pockets.
any interest? we need about 10 sets before we can break even on manufacture.
[Edited on 05-04-2007 by Dave A]
|
Cupra Steve
Banned
Registered: 7th Nov 06
User status: Offline
|

|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
thanks steve, you little back rat
|
Cupra Steve
Banned
Registered: 7th Nov 06
User status: Offline
|
|
K3 VMU
Member
Registered: 28th Jul 06
Location: Portlethen, Aberdeen,ken
User status: Offline
|
Are these just goin to be for corsas dave?
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
yes. will be doing other cars but need to use the corsasport members as guinea pigs 1st
|
K3 VMU
Member
Registered: 28th Jul 06
Location: Portlethen, Aberdeen,ken
User status: Offline
|

needing ones for my nova, just front ones 
hope the sale goes well
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
well if you send me some templates in cardboard we will make them up for you.
|
broster
Premium Member
Registered: 6th Dec 02
Location: Drives: E39
User status: Offline
|
fuck me the prices have gone up a bit since mata mark was doing them!!!
|
K3 VMU
Member
Registered: 28th Jul 06
Location: Portlethen, Aberdeen,ken
User status: Offline
|
quote: Originally posted by broster
fuck me the prices have gone up a bit since mata mark was doing them!!!
no wonder Vsport is doing well.......
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
quote: Originally posted by K3 VMU
quote: Originally posted by broster
fuck me the prices have gone up a bit since mata mark was doing them!!!
no wonder Vsport is doing well.......
mark didnt factor in Vat, postage and he hadnt sent the templates off for a proper price.
|
broster
Premium Member
Registered: 6th Dec 02
Location: Drives: E39
User status: Offline
|
£85 for a ful lset was the price we were told on vauxsport..... add vat to that and you get 99.88.... but then again i didnt realise mantamark was VAT registered....
madness....
*goes to get the band saw fired up on some carbon to get some money*
|
jr
Member
Registered: 20th May 02
Location: Kent
User status: Offline
|
quote: Originally posted by broster
£85 for a ful lset was the price we were told on vauxsport..... add vat to that and you get 99.88.... but then again i didnt realise mantamark was VAT registered....
madness....
*goes to get the band saw fired up on some carbon to get some money*
 
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
no, mantamark isnt Vat registered but he would have had to pay the Vat upon ordering them. then the postage cost is £20 a time. and the actual price of the doorcards was never known until today.
|
Greg_M
Member
Registered: 2nd Sep 03
Location: Grantham, Lincolnshire
User status: Offline
|
What happened to the extened rear cards?
has that idea been ditched?
|
J4M13
Member
Registered: 15th Apr 06
Location: Bacup (Rossendale)
User status: Offline
|
is their any chance of just buying rear and boot carbon cards?
|
J200RSA
Member
Registered: 23rd May 05
Location: Sheffield
User status: Offline
|
quote: Originally posted by J4M13
is their any chance of just buying rear and boot carbon cards?
i would aslo be interested in those aswell
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
quote: Originally posted by J4M13
is their any chance of just buying rear and boot carbon cards?
yes, will need to get a price though.
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
quote: Originally posted by Greg_M
What happened to the extened rear cards?
has that idea been ditched?
sorry, should have explained, ALL rear cards will be the extended type.
|
liamcorsa
Member
Registered: 29th May 04
Location: Hastings
User status: Offline
|
Yes please.
1. Liamcorsa. Option 2.
|
Greg_M
Member
Registered: 2nd Sep 03
Location: Grantham, Lincolnshire
User status: Offline
|
quote: Originally posted by Dave A
quote: Originally posted by Greg_M
What happened to the extened rear cards?
has that idea been ditched?
sorry, should have explained, ALL rear cards will be the extended type.
ah right, how are they mounted?
can i have some detailed pics please. ta
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
they willl either be bonded on or riveted on. or you can use snap fasteners which is a bit tidier and easier to remove.
before I go ahead and get them manufactured I need at least 10 people to show interest as the initial outlay to make them is large. once we get about 10 interested parties I will get a set made and fitted.
|
Steve
Premium Member
Registered: 30th Mar 02
Location: Worcestershire Drives: Defender
User status: Offline
|
wtf is a back rat
|
Greg_M
Member
Registered: 2nd Sep 03
Location: Grantham, Lincolnshire
User status: Offline
|
quote: Originally posted by Dave A
they willl either be bonded on or riveted on. or you can use snap fasteners which is a bit tidier and easier to remove.
before I go ahead and get them manufactured I need at least 10 people to show interest as the initial outlay to make them is large. once we get about 10 interested parties I will get a set made and fitted.
i was thinking trim pushes myself. Shouldnt be too hard to do into the standard holes
Im very interested its exactly what im after, i just dont really want to outlay 145 before ive seen some made up. so put me down for an option 2.
|
Neil
Member
Registered: 2nd Nov 03
Location: Newcastle Drives: E46 MSport Coupe
User status: Offline
|
I'll be interested if all goes to plan Dave.
|