mike1987
Member
Registered: 12th Aug 08
Location: essex harlow
User status: Offline
|
having trouble with the bench seat for my corsa, got the front seats in and the back parts in. just having trouble with the bench seat.
the leather seats are from a 2ltr calibra turbo. I'm having trouble fitting the bottom bench in, so if any one can help would be great.
|
Jamie_Hastings1
Member
Registered: 14th Aug 08
Location: Sanquhar, Dumfries and Galloway
User status: Offline
|
Take the leather off the cally 1 and put it onto the corsa one.
|
fazza
Member
Registered: 7th Feb 08
Location: Plymouth
User status: Offline
|
exactly as jamie said mate.
there a guide in tutorials but the rears can be an ass to do
|
Jamie_Hastings1
Member
Registered: 14th Aug 08
Location: Sanquhar, Dumfries and Galloway
User status: Offline
|
Well this is how i did the rear bench.....turn both benches over cally and corsa one and go round the edges with a flat bladed screwdriver and bend all the metal clips off then pull the leather and the foam off then pull the fabric and the foam off then put the corsa foam and the cally leather onto the corsa frame and pull the leather tight at the bottom and use the metal clips you took off to hold it together or cable ties or even string would do. And if you want to put the seatbelt clips throgh the propper holes make sure you push something through them to make room because there is no holes in the corsa foam for them unlike the cally 1.
|
Jamie_Hastings1
Member
Registered: 14th Aug 08
Location: Sanquhar, Dumfries and Galloway
User status: Offline
|
Finished job,base is a little saggy but very comfy.
|
Rab
Member
Registered: 10th Jun 07
Location: Alloa, Scotland Drives: Subaru Hawkeye STi
User status: Offline
|
I didnt take the leather off mine (I didnt fit it either though  ) but it did fit in eventually. Not a perfect fit, but was more than good enough.
^ Looks good 
|
