Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
anyone got a pic of one on a corsa? or any bonnet vents infact. my intake temps with the throttle bodies is rediculously high.
got a few trackdays coming up so would like to fit a vent to keep things cool!
|
Robin
Premium Member
Registered: 7th Jan 04
Location: Northants Drives: Clio 182 Cup
User status: Offline
|
take the bonnet off for trackdays
|
Tom
Member
Registered: 3rd Apr 02
Location: Wirral, Merseyside
User status: Offline
|
Only one I like is Andy's old corsa which was cut into the bonnet. Could also just remove headligth for track days
|
jr
Member
Registered: 20th May 02
Location: Kent
User status: Offline
|
There was a marroon one, that was in the haynes/maxp book that had a that vent, and it looked brillaint
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
dont want to remove headlight, need cool air directly over the trumpets.
jr.... Ive got a max manual somewhere, ill look tonight.
P.s you sent that roller in the post?
|
Teddy
Member
Registered: 19th Jul 04
Location: Northampton Drives: VW Bora 1.9TDi pd130
User status: Offline
|
Dont bonnet vent it.
Open the bumper up at the bottom or raise the bonnet at the back.
|
Robin
Premium Member
Registered: 7th Jan 04
Location: Northants Drives: Clio 182 Cup
User status: Offline
|
Dave, have you got a front crash bar?
|
AK
Member
Registered: 5th Jul 00
Location: Aberdeen City
User status: Offline
|
headlight out and raise the bonnet back to get it flowing
|
ed
Member
Registered: 10th Sep 03
User status: Offline
|
Remove all the plastic from around the radiator, remove the crash bar and raid the bonnet at the back
|
Robin
Premium Member
Registered: 7th Jan 04
Location: Northants Drives: Clio 182 Cup
User status: Offline
|
wont have plastic round the rad if it was a gsi ed
|
Robin
Premium Member
Registered: 7th Jan 04
Location: Northants Drives: Clio 182 Cup
User status: Offline
|
or was that only on the aircon sports?
|
ed
Member
Registered: 10th Sep 03
User status: Offline
|
They all have plastic round the rad, unless there is a full width slim radiator on off of an A/C model in place.
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
all plastics are removed from the rad, bulkhead has been removed, heatshield on the manifold and rad, 2 large cold air feeds.
tried raising the bonnet but although it did release some of the heat it promoted the hot air to be drawn across the top of the air filters and out under the scuttle panel so although it was a bit cooler it didnt help much (read the intake temps with the laptop plugged in whilst driving)
was thinking of fabricating a box around the front of the trumpets and fitting a vent to duct cold air behind the box.
|
jr
Member
Registered: 20th May 02
Location: Kent
User status: Offline
|
Dave, what you need is the andy H/Protech air feed kit then
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
yes, but a home made one that will cost less than £20
|