chapcorsa
Member
Registered: 13th Nov 05
Location: Greater Manchester
User status: Offline
|
need the following asap.
green/blue wire to oil pressure switch/sender (20xe)
earth lead from battery to engine
c20xe loom, the part from the plug which branches off to the icv and knock sensor. details by u2u or phone/txt 07738864582
cheers - adam
|
chapcorsa
Member
Registered: 13th Nov 05
Location: Greater Manchester
User status: Offline
|
bump, need these asap, any1?
|
Ben ev
Member
Registered: 23rd Oct 05
Location: kingslynn / torquay
User status: Offline
|
do you wont the part of the loom cut because it is part of the main harness?
got an old loom if you wont bits of it
|
chapcorsa
Member
Registered: 13th Nov 05
Location: Greater Manchester
User status: Offline
|
theres 2 types of loom mate apparerently. one has a plug on it the other has it joined on the loom, have the type of loom that you have but dont want to split and join the wires as im unsure it will work properly. thanks for the offer.
adam
|
chapcorsa
Member
Registered: 13th Nov 05
Location: Greater Manchester
User status: Offline
|
do you have an earth wire and the blue/green wire goi to the oil pressure switch/sender?? cheers
|
chapcorsa
Member
Registered: 13th Nov 05
Location: Greater Manchester
User status: Offline
|
bump
|
Ben ev
Member
Registered: 23rd Oct 05
Location: kingslynn / torquay
User status: Offline
|
no mate, cant find it anywhere. got two different loom types but neither has a plug to the icv and k sensor. only my let loom has that but good luck
|
chapcorsa
Member
Registered: 13th Nov 05
Location: Greater Manchester
User status: Offline
|
ok thanks anyway mate. will prob buy another loom to salvage
|
chapcorsa
Member
Registered: 13th Nov 05
Location: Greater Manchester
User status: Offline
|
bump
|
Ben ev
Member
Registered: 23rd Oct 05
Location: kingslynn / torquay
User status: Offline
|
as far as i am aware there are only two types of loom being pre 93 and 93 onwards when the timing gear was altered, would suggest looking on mig for more info but think you mgt strugle to find a salvage one. if you do a good job of joining wires then shudnt be much of a problem. think there is only 3-4 in that part of the loom anyway.
|
chapcorsa
Member
Registered: 13th Nov 05
Location: Greater Manchester
User status: Offline
|
will just buy a full loom with that plug on if anybody has one and cut my losses. still NEED all bits!! anyone?? thanks ben ev
|
chapcorsa
Member
Registered: 13th Nov 05
Location: Greater Manchester
User status: Offline
|
loom sorted. any other bits available
|