Dean_H
Member
Registered: 19th May 02
Location: Rhondda Cynon Taff
User status: Offline
|
Never done one before and thought it would be easy by pulling out the wires from the back of the old headunit and putting it into the new one.
BUT NO!
I pulled out the old headunit, there was a cable plugged in which i take it is the antena for the radio, and also pulled out the wiring loom from the back of the old headunit.
The new headunit i have has a different wiring loom connections, so i unplugged the old wiring loom (single block) and plugged in the new wiring loom (double block) and then plugged the loom into the back of the new headunit, i also plugged in the antena into the back of the new headunit.
But i have a cable which is ORANGE and splits into red/yellow which is sepperate from the loom but connects into the loom plug
And i also have a BROWN cable which is sepperate from the loom but then plugs into the loom connection
These were plugged into the back of the old headunit....
On the new headunit there is rear L/R connections that have not been plugged in (RED/WHITE) there are no wires for this but i have rear speakers?
Anyway i switched the headunit on with the present antena and loom plugged in and it sounded like the motor inside the headunit was turning but the display didnt come on.
What the hell am i doing wrong? i dont have any instructions with the headunit so i aint got a clue?
Anyone got any good tutorials with fitting a kenwood W4031 MP3 CD PLAYER into a corsa...
Cheers
|
Twiggy
Member
Registered: 15th Oct 04
User status: Offline
|
http://corsasport.co.uk/board/forumdisplay.php?fid=3
|
Dean_H
Member
Registered: 19th May 02
Location: Rhondda Cynon Taff
User status: Offline
|
come on guys ive posted in ice and still no help
http://www.migweb.co.uk/forums/showthread.php?p=2363838#post2363838
with pics!
cheers
|
Doug
Member
Registered: 8th Oct 03
User status: Offline
|
What exactly is the problem?
|
Doug
Member
Registered: 8th Oct 03
User status: Offline
|
replied in ICE
|
corsa_fella
Member
Registered: 22nd Apr 04
Location: Kent
User status: Offline
|
wrong forum really matey
|
Jamie
Member
Registered: 1st Apr 02
Location: Aberdeen
User status: Offline
|
Right now on the wiring there should be
Red - Red
&
Yellow - Yellow
Change these around so its
Red - Yellow
Yellow - Red
Did you take out the old "cage" and fit your new one?
|
Dean_H
Member
Registered: 19th May 02
Location: Rhondda Cynon Taff
User status: Offline
|
J-Me so what your saying is on the loom i need to swap the unplugg the connection between yellow-yellow and red-red (on the loom) ?
Why do i need to swap them? are all vauxhalls like this?
I removed the old cage but i got a new cage for the headunit.
How do you fit the headunit so its secure (with a screw into the back plate)
Or is it ok to push it in and leave it like that (thats how the old headunit was installed, all i had to do was tug on it as it slid out!
|
Dean_H
Member
Registered: 19th May 02
Location: Rhondda Cynon Taff
User status: Offline
|
And i havent fitted the new cage yet, I havent got any screws for it so i take it that you just slide the cage in and make sure its secure then slide the headunit into the cage.
But like i said how are you suppose to secure the headunit with a screw? do you go from behind the dash and screw it in or summing? does look like there is any room behind there!?!?
|
Rob_Corsa
Member
Registered: 4th Apr 02
Location: Derbyshire
User status: Offline
|
you aint meant to secure the headunit with as screw. Sometimes they supply a stud which screws into the back of the stereo and slides into the bracket on the car where the old cage screwed into.
[Edited on 26-09-2005 by Rob_Corsa]
|
Dean_H
Member
Registered: 19th May 02
Location: Rhondda Cynon Taff
User status: Offline
|
Didnt have any studs with mine.
It says to install the cage slide it in and bend the flaps out so that the cage doesnt move.
|
Richie
Member
Registered: 3rd Dec 02
Location: Newport, Wales
User status: Offline
|
how far are you from newport ill come fit the fucker for you 
|
Dean_H
Member
Registered: 19th May 02
Location: Rhondda Cynon Taff
User status: Offline
|
hehe so richie ill get it working now, its obviously aint working with the way the red/yellow is set up at the moment.
If i swap the red yellow connectors it will not damage it in anyway will it?
|
Richie
Member
Registered: 3rd Dec 02
Location: Newport, Wales
User status: Offline
|
No it wont, but the first time you plug it in all kenwoods will start to spin up. To get it to turn on you need to press the 'Source' button
|
Richie
Member
Registered: 3rd Dec 02
Location: Newport, Wales
User status: Offline
|
and make sure your ignition is on too.
|
Dean_H
Member
Registered: 19th May 02
Location: Rhondda Cynon Taff
User status: Offline
|
yes it did spin and yes the ignition was on, and i pressed every single button and no display apperared....
Well at least im sure i pressed the SRC button in lmao
So if i can hear it turning it should be connected ok, just hold the SRC button down?
|
Dean_H
Member
Registered: 19th May 02
Location: Rhondda Cynon Taff
User status: Offline
|
Updated http://www.corsasport.co.uk/board/viewthread.php?tid=238337
found somthing interesting, need help!
|
