drunkenfool
Member
Registered: 7th Feb 03
Location: Hereford Drives: Audi R8 V8
User status: Offline
|
to swap doors and boot panels over from one car to another? Are they a bitch to get hanging right or is it pretty much a straight swap? What other tools will i need apart from spanners and socket set, cos thats pretty much all i will have with me 
|
willay
Moderator
Organiser: South East, National Events
Premium Member
Registered: 10th Nov 02
Location: Roydon, Essex
User status: Offline
|
Have you checked Haynes?
|
drunkenfool
Member
Registered: 7th Feb 03
Location: Hereford Drives: Audi R8 V8
User status: Offline
|
not yet, thats inside my car at my dads house
|
Fear
Member
Registered: 20th Nov 02
Location: Down off the hill
User status: Offline
|
Doors are easy but you will need someone else to help you!
The hinges just knock out so you will need a small hammer
As for the boot in not sure but they have got to be changable easily really!
|
Teddy
Member
Registered: 19th Jul 04
Location: Northampton Drives: VW Bora 1.9TDi pd130
User status: Offline
|
Easy pins and check strap on the door - lining up is the hard bit
The boot very easy but make sure there is someone else supporting it - they are very heavy with no lifters on.
|
Ian
Site Administrator
Registered: 28th Aug 99
Location: Liverpool
User status: Offline
|
Wiring in the boot might be a bit of a problem, the loom doesn't clip out like it does on the doors.
And yes, they're all surprisingly heavy.
|
AdamF
Premium Member
Registered: 24th Apr 02
Location: Bexhill, East Sussex
User status: Offline
|
dont be fooled by how easy it looks to get the doors off  . you can buy a special tool to get the pins out.
|
a_j_mair
Member
Registered: 23rd Jan 04
Location: Scotland
User status: Offline
|
can u adjust the doors, think i need to do this
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
use new pins on everything
|
Colour-Tec Coachworks
Member
Registered: 18th Dec 03
Location: Winners of Max Power Live 2004 - Best Bodywork of
User status: Offline
|
quote:
Originally posted by AdamF
dont be fooled by how easy it looks to get the doors off . you can buy a special tool to get the pins out.
Very true mate... pain in the arse without the proper tool. If you can find some1 with a hinge pin tool its easy as. As for the refit... maybe some slight adjustment of the lock mech height etc... again very simple.
Bootlid easy to remove and refit...
Both are abit footery with the wiring, but nothing major.
best have a couple of mates handy as the doors are heavy and fitting the boot is tricky to avoid scratching paintwork...
Many hands make light work 
|
drunkenfool
Member
Registered: 7th Feb 03
Location: Hereford Drives: Audi R8 V8
User status: Offline
|
Anyone know offhand what size pin to get, going up to my dads in a bit to start 
|
