Martin
Member
Registered: 15th Mar 04
Location: Dumpstable Drives: Aztec Sxi
User status: Offline
|
Got a rockford amp, was set on havin 2 rockford subs too, just so it looks good 
i know the pro's on here love RE, n i found these, now im all confused on what to do again.
Rockford -
Precision cast aluminum alloy basket with removable and reversible aluminum trim ring
Dual 8 AWG slot loaded compression terminals
High excursion thermal rubber surround
Embedded 12 AWG tinsel leads
Massive double stacked magnet motor structures
Anodized aluminum voice coil former w/ copper clad aluminum wire
Parabolic aluminum dustcap w/ fiberlock cone body
Power handling(RMS) - 600 Watts
Power handling(Peak) - 1200 Watts
Impedance - Dual 2 Ohms
RE -
Dual 2 Ohm
Dual composite 2 piece cone
Rubatek foam surround
Cast aluminium basket
Tork-Tite terminal
4 layer copper voice coil
FEA optimized TG technology motor structure
Triple stack magnets
Progressive spider
Wrap around rubber gasket
1000wrms power handling
Only about £30 between them...
holla!!
|
AdiSRI
Member
Registered: 1st May 02
Location: Berkshire
User status: Offline
|
The RE are a better sub IMO, but can your amp power 2 of them?
|
Martin
Member
Registered: 15th Mar 04
Location: Dumpstable Drives: Aztec Sxi
User status: Offline
|
quote:
Originally posted by AdiSRI
The RE are a better sub IMO, but can your amp power 2 of them?
my amp-
700 W x 1 @ 4 Ohms RMS
1100 W x 1 @ 2 Ohms RMS
i've been told that if powering two to look for about 600RMS each.
on car audio direct they have 600rms RE subs SE10V4, but they are dual 4ohm, n im after dual 2ohm.
Dual 4 Ohm
Dual composite 2 piece cone
Rubatek foam surround
Cast aluminium basket
Tork-Tite terminal
4 layer flatwound aluminium voice coil
FEA optimized TG technology motor structure
Triple stack magnets Progressive spider
Wrap around rubber gasket
600wrms power handling
Cant seem to find them anywhere.. Would these be more suitable then, if they exist.
|
AdiSRI
Member
Registered: 1st May 02
Location: Berkshire
User status: Offline
|
not really ideally u need an amp that will run 1 ohm or u need subs that are dual 4 and 1000w RMS or 2 dual 2 ohm and 500w rms each.
|
loo_goblin
Member
Registered: 14th Jul 04
Location: Horsham, West Sussex
User status: Offline
|
get RE's
|
Martin
Member
Registered: 15th Mar 04
Location: Dumpstable Drives: Aztec Sxi
User status: Offline
|
quote:
Originally posted by AdiSRI
not really ideally u need an amp that will run 1 ohm or u need subs that are dual 4 and 1000w RMS or 2 dual 2 ohm and 500w rms each.
so if RE make an SE10V4 sub thats dual 4ohm
does this mean they could make a SE10V2 thats dual 2ohm?
it doesnt matter if the Rms is to high does it, rather that than too low 
If you think this "SE10v2" is wat i want, how do i know if it exists and where do i get it from... cant find it any where?
loo_goblin, yes im lookin at RE's mate, just need to know if the right one exists..
|
Richie
Member
Registered: 3rd Dec 02
Location: Newport, Wales
User status: Offline
|
they dont do a dual 2 ohm version of the SE sub, your using rockford fosgate product code logic there 
[Edited on 14-03-2005 by Richie]
|
Martin
Member
Registered: 15th Mar 04
Location: Dumpstable Drives: Aztec Sxi
User status: Offline
|
quote:
Originally posted by Richie
they dont do a dual 2 ohm version of the SE sub, your using rockford fosgate product code logic there
[Edited on 14-03-2005 by Richie]
 well that then, is very gay.
do they do any dual 2ohm subs at 600 rms ish?
|
Martin
Member
Registered: 15th Mar 04
Location: Dumpstable Drives: Aztec Sxi
User status: Offline
|
-
WELL!!!
wat would be louder then, 2 of the above rockfords or 1 RE SE10V4....?
|
AdiSRI
Member
Registered: 1st May 02
Location: Berkshire
User status: Offline
|
quote:
Originally posted by Richie
they dont do a dual 2 ohm version of the SE sub, your using rockford fosgate product code logic there
[Edited on 14-03-2005 by Richie]
Not true richie...
RE are just about the only brand that WILL make subs with ANY voice coil option you want for a few quid extra.
Ring CAD and speak to them matey, they will be able to organise you a pair of the 600w RMS subs, withdual 2 ohm coils im sure, think its £50 extra a sub tho, and ob you have to wait for them to be custom made.
|
Richie
Member
Registered: 3rd Dec 02
Location: Newport, Wales
User status: Offline
|
Me? Wrong? Never!!!!!
*Goes and sits in the corner and sulks*
even i can learn
|
AdiSRI
Member
Registered: 1st May 02
Location: Berkshire
User status: Offline
|
lol, normally your very right, i just know that RE will do custom coils, even quad coil efforts for extra cash as i was enquiring myself...
|
Martin
Member
Registered: 15th Mar 04
Location: Dumpstable Drives: Aztec Sxi
User status: Offline
|
quote:
Originally posted by AdiSRI
quote:
Originally posted by Richie
they dont do a dual 2 ohm version of the SE sub, your using rockford fosgate product code logic there
[Edited on 14-03-2005 by Richie]
Not true richie...
RE are just about the only brand that WILL make subs with ANY voice coil option you want for a few quid extra.
Ring CAD and speak to them matey, they will be able to organise you a pair of the 600w RMS subs, withdual 2 ohm coils im sure, think its £50 extra a sub tho, and ob you have to wait for them to be custom made.
cheerz, ring i shall. You say £50 more each sub, £50 more than what...?
ill ring em during the week, shall post up what they say.
|
