steve101
Member
Registered: 25th Oct 04
Location: Kilmarnock, Ayrshire, Scotland
User status: Offline
|
my speedo cable just snapped, so i've decided to ditch that, and I aquired an electronic set of clocks, as well as the drive - which has 3 wires atatched to the cable. I understand Brown would go to the Ignition live, and black to be earthed, however there's another wire which obviously goes to the multi plug.....
Question is what is the layout of the wires on the multi plugged when configured correctly?
A picture might be helpful also - or a diagram showing the wiring layout on the multiplug.
Cheers guys
|
steve101
Member
Registered: 25th Oct 04
Location: Kilmarnock, Ayrshire, Scotland
User status: Offline
|
Help please! I dont want to fcuk this up and end up with more problems lol. Also where can I find this ignition live?
Cheers
|
Kerry
Member
Registered: 5th Oct 01
Location: Norwich
User status: Offline
|
one wire needs to go to the transducer
|
steve101
Member
Registered: 25th Oct 04
Location: Kilmarnock, Ayrshire, Scotland
User status: Offline
|
Right I've found a plug for a different kind of speedo drive taped up in the loom, which im going to use rather than running a few cables right through the car... a bit of the mechanical drive however fell back into the gearbox and I cant seem to get it back out though
|
Rileysport
Member
Registered: 18th Jun 04
Location: West Yorkshire
User status: Offline
|
1) brown is earth and black is switched live
2) if you lost anything in the box your screwed anyway 
|
steve101
Member
Registered: 25th Oct 04
Location: Kilmarnock, Ayrshire, Scotland
User status: Offline
|
it fell back into where it was meant to go, so i need something long enough to get it back out.... the speedo MUST be getting power cos if i move the needle to say 30, when i switch it on, the needle goes to 0
|
steve101
Member
Registered: 25th Oct 04
Location: Kilmarnock, Ayrshire, Scotland
User status: Offline
|
Ok, if there's anyone in Ayrshire able to wire this up for me, i may be willing to pay!!!
Cheers!
|
Carr
Member
Registered: 1st Oct 04
Location: Leicestershire (Home) Ambleside, Lakes (Uni)
User status: Offline
|
Ring around some local garages
|
steve101
Member
Registered: 25th Oct 04
Location: Kilmarnock, Ayrshire, Scotland
User status: Offline
|
they may not want to do it, as its a conversion from a cable driven speedo to an electronic one (as thats all i could find at the time at the scrappies)
Might not have the specialist knowledge?
|
