K2 GTi
Member
Registered: 21st Oct 04
User status: Offline
|
Hi everyone!
I've bought a smooth boot panel from ebay and I don't have a clue how to fit it. The thing is it looks different to the pic on ebay..
Please could someone help me and give me an idea on how to fit it on 
Thanks for your help
|
CoastalCorsa
Member
Registered: 7th Jan 05
Location: Lancashire
User status: Offline
|
I bought one of ebay 45 quid think is was i had to remove my gsi spoiler and cut the rubber around the bottom edge of my rear window so that the lip on the mould could go under the window edge, also had to trim the mould down abit aswell, I used loads of sealant to stick it to the original boot skin where it makes contact then had to use filler around all the edges of the fibreglas skin.
People need to be careful buying off ebay as some of these fibreglass kits people are selling dont fit straight onto ya car
|
shorty235
Member
Registered: 14th Dec 03
Location: South Shields, Tyne and Wear
User status: Offline
|
same here.
take spoiler off.
pull rubber out.
see how it fits.
bond it on.
filler around all edges.
smooth and spray.
mine needed a bit of trimming too.
|