FletcherSRi
Member
Registered: 21st Mar 03
User status: Offline
|
Decided to split the full kit and sell seperate
JLaudio 10"w0,
Nominal Diameter: 10 inches (250 mm)
Continuous Power Handling: 125 Watts
Voice Coil: 1.38" diameter, 6-layer, Kapton former
Configuration: 4 ohm (Single Voice Coil)
Xmax (one-way, linear): 0.34" (8.6 mm)
Sealed Enclosure Range: 0.50-0.90 cu.ft. (14.0-25.5 liters)
Ported Enclosure Range: 0.90-1.50 cu.ft. (25.5-42.5 liters)
VRC™ Technology: YES
£55 plus delivery(i have two of these, £95 for both)
Infinity RA5004 amp
RMS power output into 4 ohms: 4 x 60 W / 2 x 160 W
RMS power output into 2 ohms: 4 x 80 W
Frequency response: 7 Hz - 75 kHz (-3 dB)
Harmonic distortions: < 0,06 %
Channel separation: >60 dB
Signal to noise ratio: 105
Input sensitivity LOW LEVEL INPUT: 250mV - 4 V
Input impedance LOW LEVEL INPUT: 20 kOhm
Lowpass filter Variable: 40 - 400 Hz 12dB/Octave
Highpass filter Variable: 40 - 400 Hz 12dB/Octave
£70 plus delivery
|
