AdiSRI 
Member 
 
Registered: 1st May 02
 Location: Berkshire 
User status: Offline 
 
 | 
 
rer one must work on twist, the axle isnt solid and the ARB runs through the middle. 
 
So joff i should be able to get harder front and rear springs... do u have any idea about cost? 
 
And is it therefore not worth me getting a new ARB?
 | 
Joff 
Member 
 
Registered: 17th Oct 00
 Location: Cambridgeshire 
User status: Offline 
 
 | 
 
Fronts would only be around £30 I'd have thought. 
 
No idea on rear springs, but it wouldn't be an FK item.  Scrap the platform on the rear and measure the height of the spring when its wound to get the height you're after for the new spring.
 | 
AdiSRI 
Member 
 
Registered: 1st May 02
 Location: Berkshire 
User status: Offline 
 
 | 
 
hmm its the rear thats the main bloody problem, i need summat stiff back there to stop the rubbing so i can lower it some  more! 
 
Will a stiffer set of front springs be ok with the 1.4, not too hard?
 | 
Joff 
Member 
 
Registered: 17th Oct 00
 Location: Cambridgeshire 
User status: Offline 
 
 | 
 
Don't lower it - they look gash when they're on the ground and you're ruining your handling.
 | 
AdiSRI 
Member 
 
Registered: 1st May 02
 Location: Berkshire 
User status: Offline 
 
 | 
 
You think mine is low enuff? 
 
 
 | 
Joff 
Member 
 
Registered: 17th Oct 00
 Location: Cambridgeshire 
User status: Offline 
 
 | 
 
Yes. 
 
It looks higher at the rear because of the bumper. 
 
What about adding a very thin (1cm) white splitter across the length of the rear bumper underneath the black?
 | 
Jambo 
Member 
 
Registered: 8th Sep 01
 Location: Maidenhead, Drives: VXR Arctic 
User status: Offline 
 
 | 
 
Adi, your car is the perfect rideheight. It looks ace   
 
Wish mine was that low  
 | 
AdiSRI 
Member 
 
Registered: 1st May 02
 Location: Berkshire 
User status: Offline 
 
 | 
 
exhaust is in the way... 
 
so if i just change the fronts to harder springs will it still handle ok? 
 
And you dont think i should change the rear shockers to adjustible items?
 | 
Siberia 
Member 
 
Registered: 9th Oct 03
 Location: Leprechaun Land      Drives : Zafira GSI 
User status: Offline 
 
 | 
 
i actually think its the 17" weel that make the skirts loook far off the ground.... get some 16's  
 | 
AdiSRI 
Member 
 
Registered: 1st May 02
 Location: Berkshire 
User status: Offline 
 
 | 
 
my car used to have 16's, i got 17'ds ass they looked small 
 
  
 
You see looks loads better now.
 | 
Siberia 
Member 
 
Registered: 9th Oct 03
 Location: Leprechaun Land      Drives : Zafira GSI 
User status: Offline 
 
 | 
 
^  yeah ure right they do look small for some reason
 | 
Siberia 
Member 
 
Registered: 9th Oct 03
 Location: Leprechaun Land      Drives : Zafira GSI 
User status: Offline 
 
 | 
 
thats how low my adjusters are down... but as said i have 16's.... 
 
 
 | 
AdiSRI 
Member 
 
Registered: 1st May 02
 Location: Berkshire 
User status: Offline 
 
 | 
 
yeah yours are lower than mine, i had mine fully wound down originally and it was bloody low.
 | 
TOMAS 
Member 
 
Registered: 7th Aug 02
 Location: Nottinghamshire 
User status: Offline 
 
 | 
 
Stiffer fronts will only make the rears feel softer/do more work. Firstly find out what poundage yours are and we'll work from there. I have 300lb fronts on my 1.2 16V which is a tad hard but I fitted them with the intension of a Valver going in very soon. 
 
[Edited on 15-09-2004 by TOMAS]
 |