COR54 801
Member
Registered: 24th Jul 03
Location: SCOTLAND
User status: Offline
|
Bonnet seem to dip down to the left-at the front(as if someone has pushed/sat down on the front corner) any ideas as how to sort this?seems as if it's sitting on squint?
need to remove my front headlights?-any ideas how to remove them?
 appreciated as always!
|
suzi-sue
Member
Registered: 1st Mar 04
Location: west yorkshire
User status: Offline
|
adjustable rubber stoppers? check out the "ridge" on the inner wing under the bonnet
|
COR54 801
Member
Registered: 24th Jul 03
Location: SCOTLAND
User status: Offline
|
donno wot u mean mate? sori....... appreciated if u cud explain more! it's a bad-boy bonnet> got it about a week ago! but seems to fit squint?
|
5doormodder
Member
Registered: 16th May 02
User status: Offline
|
so did it fit like this when you first got it ? bonnet could be warped, if you got it delivered chances are its been damaged in transit.
Try fidling with where its fastened to the hidges, you can adjust it a little bit there. Make sure the rubber stoppers under the bonner are there still aswell, if they are adjust them so they stick far out
|
suzi-sue
Member
Registered: 1st Mar 04
Location: west yorkshire
User status: Offline
|
where the bonnet rests when its shut, there are rubber stops on the inner wings, near where the bonnet prop sits, cant remember what they're like on corsas tho
|
COR54 801
Member
Registered: 24th Jul 03
Location: SCOTLAND
User status: Offline
|
rubber stops? nop!....don fink so.?seems to sit fine at 1 side,but not the other!!
|
COR54 801
Member
Registered: 24th Jul 03
Location: SCOTLAND
User status: Offline
|
ANYONE GOT PICS TO ILLUSTRATE WHAT THEY MEAN? sound like a right dunce-Jus i don't think i have em,and a won't know what to look for if a don't have it!! 
ANYMORE IDEAS?
|
1600power
Member
Registered: 22nd Apr 04
Location: Shropshire Drives: 1.6 16v Sport
User status: Offline
|
1.
open the bonnet and put it up on the catch!
2.
Looking at the bonnet from the inside u shud see near both frontal corners 2 black round pieces of rubber, turn these on the side that is sitting to high or low in the desired location to raise or lower the bonnet
3.
Play around for a while until u get the right balance....if u are missing one of these black cylinders then ur problem lies their u need to aquire sum new ones.
4.
if playing about with the stoppers doesnt work advertise the car in the Autotrader cuz it aint worth anymore hassle lol
|
