ONeil
Member
Registered: 12th Feb 03
Location: Telford
User status: Offline
|
Broke down last night i reversed the car and then it just started revving tried all the other gears and got no response from the wheels.
Got out to have a look and the passenger side drive shaft was hangin down, the driveshaft end has like a big star on it that i think slots back in 
Anybody know if a clip holds it in or have i caused more damage
Cheers Scott
|
Paul H
Member
Registered: 11th Aug 03
Location: Lincoln.
User status: Offline
|
sounds like it's too low and it's pulling the shafts out was it the gearbox end?
|
ONeil
Member
Registered: 12th Feb 03
Location: Telford
User status: Offline
|
dont know it is where it sticks in by the alloy at the back of the break disc on the passenger side, drivers is fine
|
Paul H
Member
Registered: 11th Aug 03
Location: Lincoln.
User status: Offline
|
that side should have a clip to hold the cv joint on
|
ONeil
Member
Registered: 12th Feb 03
Location: Telford
User status: Offline
|
dont know all i know is that the car dont drive and that aint in the hole it should be in
|
bradfincham
Member
Registered: 20th Sep 02
Location: East Of England Drives: Clio 172
User status: Offline
|
u will usaually know,
if it broke at the gearbox end it will rattle when you start it up,
if you have broken it off the cv joint and its still attacthed to the gearbox then it will be turning when you select a fear
|
bradfincham
Member
Registered: 20th Sep 02
Location: East Of England Drives: Clio 172
User status: Offline
|
it may have just popped out, or you may have sheered it off like POA used to all the time!
|
