In a rented house, so I know I should just go talk to the landlord. I did that a while ago, he quickly referred me to his plumber and I've been dealing direct with him for several months now.
Basically, sometime over summer something happened with the boiler. We've got an electric shower, dishwasher, washing machine, etc so over summer the boiler wasn't really missed so I wasn't particularly urgent in getting it sorted.
Now though, it's fucking freezing :lol:
Problem was initially that the boiler would "lock out", red lit button would be on the front - so would push it, and within 30 secs or so it would lock out again.
Plumber came first time and "fixed" that, said the pressure was far too high due to a tap that had worn or something. Fixed all that, pressure down to 1bar from 3 (I think) and boiler fired up and stayed on.
Over the following few days though, it would start locking out after 8-10hours of being on.
Plumber has been back a few times, poked at it and scatched his head - but not sure what the issue is.
Symptoms now are:
- When first firing it up after a lockout it locks again within 30seconds guaranteed.
- Give it 30secs and then start it again, it'll fire up and stay on for most of a day. (Around 10 hours I'd say)
- Locks out after the 10 hours, getting me back to step 1.
We've been living with it by firing it up when we get in from work then giving the house an hour or so to warm up, but by the middle of the night it's bloody freezing again and it's terrible first thing on a morning.
It's a Trianco contractor apparently, fuel is oil from a tank in the back garden - gauge is showing 50% full.
Any ideas? I'm going to speak to Landlord again on saturday about me using a different plumber which I'm sure will be fine - but there are so many knobs, taps and gauges on the front of it - surely I can have a crack at just fixing it? :0
|
