:thumbs:

was this code:

Samsung (6000 series) 1340

bloody sky website only listed 0060 :(

cheers adio.

ok, must be the wrong code. I'll have a look (what Samsung model TV is it?)



Samsung 0060 065, 584, 037, 245, 476, 398, 516, 292, 318,

037

Samsung (6000 series) 1340


To program using the 3 digit code.

1) Switch on the TV set

2) Press the TV button on the Sky Remote

3) Hold down the select and red buttons for 2-3 seconds until the LED blinks twice

4) Enter the 3 digit code

5) Press the select button to store

Press TV and any number to test, If this does not operate the TV set try below.



To program using the 4 digit code

1) Switch on the TV set

2) Press the TV button on the Sky Remote

3) Hold down the select and red buttons for 2-3 seconds until the LED blinks twice

4) Press the TV button on the Sky Remote again

5) Enter the 4 digit code for your make of TV

6) The LED should blink twice, if not recheck the 4 digit code used and go back to 1

7) Press the standby button on the Sky Remote (The TV should go to standby)

8) Press select to store this setting

If the TV does not go into standby press the TV button then the standby button, then TV then standby, keep repeating this until successful. This will scan the codes used for a particular make of TV.


[Edited on 26-05-2011 by adiohead]

yeah it does that fine, then after i enter the 4 digit code '0060' it doesn't flash at all.

are you able to get the LED to flash twice yet by holding down red & select?

1. Select any channel on the TV.
2. Point your Sky+ remote control away from the TV and press the tv button.
3. Press and hold down the Select and red buttons simultaneously on the Sky+ remote control until the red light at the top of the Sky+ remote control flashes twice.
4. Input the 4 digit number from the Sky+ remote control codes then press the Select button. The red light at the top of the Sky+ remote control should flash twice.
5. Point the Sky+ remote control at the TV and try the volume button.

still doesn't work though.

bought a new sky remote and it all works but i can't turn the volume up or down with it.

searched on google and it said hold down select and red button but it doesn't make the red light flash.

any ideas?

tv is a samsung.