|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Off Day » Geek Day » HD & PS3 » Post Reply
|
xa0s |
posted on 16th Apr 09 at 01:46 |
quote: :boggle: Holding the button for two beeps resets the output settings to whatever you're using, that's the whole point of it... Plug the HDMI lead in, hold for 2 beeps and sorted... | |
nathy_87 |
posted on 15th Apr 09 at 17:31 |
Thanks john and eck worked perfectly :) | |
nathy_87 |
posted on 15th Apr 09 at 15:03 |
i'll try it tonight. | |
John |
posted on 15th Apr 09 at 14:57 |
Doesn't really matter what you've got plugged in, if you unplug the av cables and just use the hdmi cable it should come up over hdmi though. | |
nathy_87 |
posted on 15th Apr 09 at 14:56 |
So at the min the AV cables (red,yellow & white) are plugged in, do i need to plug them in/out before i pres & hold the power button? | |
Eck |
posted on 15th Apr 09 at 12:49 |
As John said, hold down the power button until it beeps a couple of times to reset the settings. Then plug in the AV cables and go into your settings and change it to HDMI. You'll get picture and sound that way, unless of course you change the output settings. | |
John |
posted on 15th Apr 09 at 12:46 |
Hold down the power button on the ps3 for at least 30 seconds, a good while anyway. | |
bubble |
posted on 15th Apr 09 at 12:46 |
quote: have you bought this 2nd hand? chances are its set to output at a non hdmi setting. when swopping between tvs, i turned ps3 on, then plugged into ps3 then into tv, and it switched. | |
nathy_87 |
posted on 15th Apr 09 at 12:40 |
corsa_tomtom-Got it from game. £9.99 | |
ash_corsa |
posted on 15th Apr 09 at 12:23 |
Plug in the composite cable that comes with your PS3 and check the resolution of the HDMI output, your TV wont show an image if its set to 1080P | |
Tommy L |
posted on 15th Apr 09 at 12:15 |
I wouldn't of thought so :boggle: Should pick up straight away :/ | |
nathy_87 |
posted on 15th Apr 09 at 11:42 |
i have got a HD tv plugged the HDMI cable into both tv and ps3 got it onto the right channel (hdmi 2) and all I've got is sound? Do i have to give it a minute or so to recognise? This is my tv. Thankyou |