Yeah its possible to do this, there are two types of dash, cable and electronic. Cable dashes start at 10mph. Electronic ones start at zero and work in reverse. Generally speaking electronic dashes already have the rev counter feed in the loom as its as easy as plugging a new dash unit in or tapping in to the loom if you fancy a stick-on rev counter instead of replacing the set of three for a four-clocker. Cable dashes generally don't have the wiring in there and you'll need to run your own from the coil and possibly also smooth it with a capacitor as I had to in the case of fitting a GSi set of clocks to my '95 1200.

By the way, the search icon is also at the top of the screen :P

looks can be deceiving :P

Erm yeah - really looks like a merit drew! :rolleyes::lol::P

well i was gonna put a set of dials in from a sport.
but i aready had a rev meter and i fancied a pod so in it went and it was easier for me to take it from the coil as ive done it before

OK cool cheers guys. Will have a look later and see if its there.;)

Steve

why take it from the coil if its in the loom? aint that a waste of time

btw - ive heard it aint in all of the looms for some reason

its in the loom green wire on left of multi plug
but you masewell just take it from th coil like i did

mines a merit :D - wire was already in loom, just a matter of putting the new dash in :thumbs

:( not fair

Yeah im minted at the moment;)

Steve.

And money to burn ???

Cos i have as much tech knowledge as a sea slug:lol:

Steve.

Why not try it ureself, n if u cant do it then take it to get done

ttt.

I will be getting it done at R-Tec. but they dont know if its even possible yet. So i thought i would ask you guys.

Steve

I dont think it would be easy - prob more hassle than its worth.

Maybe ive got it all wrong - have a look in a few haynes manuals.

take the green wire from the coil to the feed on the counter

but

like mine, they might not b one, so make your own

dead easy

marv

I want to fit a rev guage. One of those with the big shift light. BUT cos i dont already have a rev counter, will this even be possible???

Steve:o