|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » General Chat » do ford alloys fit peugeot? » Post Reply
|
djmattyh |
posted on 3rd Dec 09 at 14:19 |
all i need to know thanks alot to everyone :) | |
Tomnova16 |
posted on 3rd Dec 09 at 13:32 |
other way round, the pug wheels will fit on the fiesta, if they are after market they are usually 73mm centre bore and spiggot rings are used | |
chrisritch |
posted on 3rd Dec 09 at 13:31 |
would need 20mm spacers and extended bolts also | |
DaveyLC |
posted on 3rd Dec 09 at 13:29 |
I got it round the wrong way in my post lol :D pug on ford but not ford on pug. | |
Dan.H |
posted on 3rd Dec 09 at 13:29 |
Just checked and 106/206 centre bore ir 65.1 and fiesta are 63.1unless they are aftermarket wheels | |
Tomnova16 |
posted on 3rd Dec 09 at 13:26 |
yep spent yesterday finding this out same pcd but wrong centre bore, mondeo is 63.4 and 406 65.1 so as dave said would need machining, | |
DaveyLC |
posted on 3rd Dec 09 at 13:23 |
As Danh says the PCD is the same and the offset is compatible but the bore hole is bigger on the fords so you can fit ford wheels to a pug but not the other way around unless you machine the hole. | |
djmattyh |
posted on 3rd Dec 09 at 13:20 |
damn was hoping they are the same o well | |
Dan.H |
posted on 3rd Dec 09 at 13:16 |
Think the centre bore is too small they fit the over way though peugeot to ford iirc | |
fazza |
posted on 3rd Dec 09 at 13:15 |
yeh im pretty sure theyre the same | |
djmattyh |
posted on 3rd Dec 09 at 13:14 |
bit of a longshot but does anyone know if ford fiesta alloys will fit a 106 or 206? they are both 4 stud |