|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » General Chat » Oil Temp/Pressure gauge sender mounting...? » Post Reply
|
spikedjack |
posted on 20th Sep 09 at 18:55 |
:( | |
Warren G |
posted on 20th Sep 09 at 18:52 |
ah, yes, forgot about you already have a feed for the turbo off that! | |
spikedjack |
posted on 20th Sep 09 at 18:50 |
Ooooo, now we're cooking.... | |
Warren G |
posted on 20th Sep 09 at 18:48 |
as long as the temp sensor fits in the hole, yes :) | |
spikedjack |
posted on 20th Sep 09 at 18:46 |
lol, i honestly cant be done with oil pissing everywhere this time of a sunday evening... | |
Warren G |
posted on 20th Sep 09 at 18:43 |
take your oil switch out and check :0 | |
spikedjack |
posted on 20th Sep 09 at 18:39 |
That would be an idea warren, any idea what fitting it is? | |
Warren G |
posted on 20th Sep 09 at 18:38 |
you could get a oil pressure/temp gauge to fit where the pressure switch is? | |
Warren G |
posted on 20th Sep 09 at 18:37 |
havent seen his new set up, with the oil cooler and remote filter yet | |
davieslim |
posted on 20th Sep 09 at 18:35 |
for oil pressure id just use a sender from a nova/calibra models that came with the oil pressure gauge as theres 2 terminals on it 1 for the warning light and the other for the gauge | |
spikedjack |
posted on 20th Sep 09 at 18:33 |
what his oil cooler sandwich plate? | |
Warren G |
posted on 20th Sep 09 at 18:32 |
nathans one has 6 fixing places jack.... | |
spikedjack |
posted on 20th Sep 09 at 18:27 |
Already have a sandwich plate for my oil cooler and another one would make the oil filter foul something important. |