|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » General Chat » rotting in spare wheel well » Post Reply
|
ed |
posted on 4th Aug 09 at 08:11 |
Just make sure you cut out all the rot by cutting around about 10mm to the outside of where it stops; and as said, cover the lot in underseal on the outside. You could Waxoyl it too for good measure. | |
harrisp |
posted on 3rd Aug 09 at 22:39 |
Its easy to cut out, weld a new bit on the inside, cover the inside with roof flashing (similar to the sound proofing) and cover it in underseal on the outside. | |
am4nf |
posted on 3rd Aug 09 at 22:23 |
Its your car, no-one is going to get hurt from it so it wouldnt matter | |
cjohnson |
posted on 3rd Aug 09 at 22:20 |
Might have a word with a lad I know that's an engineer, see if he could do it for me. Wouldn't really matter so much tough would it?? I mean I want it putting bang right, but if I was to just prevent it getting worse would it be ok?? | |
am4nf |
posted on 3rd Aug 09 at 22:12 |
cut it out weld new bit in | |
cjohnson |
posted on 3rd Aug 09 at 22:11 |
Hi, done a massive clean on my car tonight. |