|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » General Chat » HELP, Urgent FAO people that have changed there steering wheel » Post Reply
|
DanielJ |
posted on 19th Feb 03 at 17:41 |
hmm. not sure then m8 mine fitted fine jus try fiddlin with it | |
jr |
posted on 19th Feb 03 at 17:38 |
that end of it's fine. It seems to be the plastic part which has a brass ring which conectes the horn to the steering colume, seem like it is pushed 2 far back and locks it when it hits the indicator returns switch | |
DanielJ |
posted on 19th Feb 03 at 17:35 |
yeh i no which 1 it is same as mine except the suede bit, push the horn thru the centre without using that metal ring an u shud be fine :) | |
jr |
posted on 19th Feb 03 at 17:33 |
No leather with an alloy centre and the horn push in the middle | |
DanielJ |
posted on 19th Feb 03 at 17:31 |
got like a suede bit on top of the wheel? | |
jr |
posted on 19th Feb 03 at 17:30 |
momo Race i think | |
DanielJ |
posted on 19th Feb 03 at 16:49 |
not sure if its the same m8 but wen i fitted mine i didnt use tha metal ring thing, mite b diff cos i got a snap off boss, what momo wheel is it | |
jr |
posted on 19th Feb 03 at 16:12 |
please need to find out whats wrong now | |
jr |
posted on 19th Feb 03 at 16:04 |
Just bought a Momo sterring wheel and required boos, when fitting the new wheel with the boss and the plastic with the metal ring for the horn connection taht goes in the back of the boss the wheel locks after about 1/8 of movement, like it gets caught on the indicator return bit, so put the old wheel on to drive it and it does the same, plus when u turn it right the horn goes off ? |