|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » General Chat » Urgent help needed :( (c20let wiring) » Post Reply
|
Col004 |
posted on 8th May 09 at 19:38 |
thick to thick. leave the thin alone, just follow that sheet mate and it will be spot on:thumbs: | |
Col004 |
posted on 8th May 09 at 19:36 |
just cap it off matey. you dont need it:thumbs: | |
Mike GSi |
posted on 8th May 09 at 19:31 |
at the moment its thin red/blue to thin red/blue? if i change them over what do i do with the thin re/blue now left over? :lol: | |
Mike GSi |
posted on 8th May 09 at 19:29 |
so the thicker red/blue on the LET loom goes to the thin red/blue left on the corsa? | |
Col004 |
posted on 8th May 09 at 19:22 |
Follow that matey. | |
Mike GSi |
posted on 8th May 09 at 19:14 |
Yeah i know that thanks :) but im wondering what the brown/blue wire that goes into the fuel pump relay does :thumbs: | |
Rupean |
posted on 8th May 09 at 19:01 |
the fuel pump wire on the engine loom is a thick red/blue and same for car side. | |
Mike GSi |
posted on 8th May 09 at 18:59 |
thank you very much ;) | |
lee mitchell |
posted on 8th May 09 at 18:19 |
the brown blue on the corsa loom goes to eml light. there will b a plug on the let loom which will have a brown and blue that this needs connecting too. the brown blue from the relay should go to pin 3 on the ecu | |
Mike GSi |
posted on 8th May 09 at 17:48 |
fuel level is low but not that low, the pump didnt used to buzz constantly. | |
andyc1234 |
posted on 8th May 09 at 17:47 |
they do buzz all the time unless its stupidly loud then i dont know hows your fuel level? | |
Mike GSi |
posted on 8th May 09 at 17:45 |
So Fuel pump plug Brown/Blue to Corsa loom Brown/Blue? | |
andyc1234 |
posted on 8th May 09 at 17:43 |
just connect t colour for colour to the corsa loom its as easy as thats. any that dont match are not used | |
Mike GSi |
posted on 8th May 09 at 17:42 |
Where does the Brown and blue wire goe that comes out of the fuel pump relay? |