|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » General Chat » C20XE tigra » Post Reply
|
adamC20xe |
posted on 20th Sep 07 at 14:51 |
mine has a cut out but you dont need a lot just enough for the power cap but you can maybe get away with just knocking it back a bit | |
rossnomore |
posted on 20th Sep 07 at 14:32 |
ive just been told ill have to cut the bulkhead??? | |
rossnomore |
posted on 20th Sep 07 at 09:55 |
cheers boys :thumbs: | |
Ste L |
posted on 19th Sep 07 at 16:27 |
only need to be lowered a few mil, if you remove the sound deadening off the bonnet.. | |
JM_16v |
posted on 19th Sep 07 at 16:25 |
raise the centre of the bonnet slightly | |
TomSBD |
posted on 19th Sep 07 at 16:19 |
you need to either lower the engine or higher the bonnet as the rocker cover will hit it | |
rossnomore |
posted on 19th Sep 07 at 14:57 |
:thumbs: | |
CORSA NUT |
posted on 19th Sep 07 at 14:52 |
Your both in Fife too :) | |
rossnomore |
posted on 19th Sep 07 at 14:52 |
if you could wait a month or two till my bursary comes through then uve got a deal | |
adamC20xe |
posted on 19th Sep 07 at 14:47 |
500 for almost all you need ie engine loom box etc right here | |
rossnomore |
posted on 19th Sep 07 at 14:41 |
Im putting a C20XE in my tigra next summer and was wondering if its any different from doing it to a corsa? i dont think it is though. also, How many more mounts do i need? just 1? a rough estimate of costs would be good 2, cheers :thumbs: |