|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » General Chat » Any1 with a Mantzle (copy) style inlet, Help Required.... » Post Reply
|
C4RL0 |
posted on 17th Mar 07 at 15:54 |
There's no need to get it exact. If you want ot get it exact, then buy a Mantzel one which has been properly made, flow bench tested etc etc | |
C4RL0 |
posted on 17th Mar 07 at 15:53 |
Well just take a look at the box, it's about an inch bigger at each end over the lower inlet. | |
graham16v |
posted on 17th Mar 07 at 15:45 |
I would still like an overall length of a manifold. | |
graham16v |
posted on 17th Mar 07 at 15:43 |
quote: That is a good pic. Very helpful with the plumbing side of things. I'll defo put my vacuum points on the front. | |
C4RL0 |
posted on 17th Mar 07 at 15:42 |
To the rocker cover. I am guessin you mean the pipe with a little filter on. | |
Jenko_Sport |
posted on 17th Mar 07 at 15:40 |
Whats that breather filter connected to? | |
C4RL0 |
posted on 17th Mar 07 at 15:38 |
It's best if you put the vacuum pipes on the front though so you don't foul then coolant resevoir. | |
C4RL0 |
posted on 17th Mar 07 at 15:37 |
quote: Here's a good pic http://www.corsasport.co.uk/carimages/2818/22022006002.jpg | |
graham16v |
posted on 17th Mar 07 at 15:35 |
Cheers. | |
C4RL0 |
posted on 17th Mar 07 at 15:32 |
I can't remember how many vacuum pipes, there's more than enough posts on here though about vacuum pipes. Because that's where people always get confused. Have a search. | |
ainsley_brader |
posted on 17th Mar 07 at 15:31 |
you can see std throttle body bolted on left hand side of my last picture! | |
Jenko_Sport |
posted on 17th Mar 07 at 15:27 |
So just 1 vacume pipe then? | |
C4RL0 |
posted on 17th Mar 07 at 15:26 |
The standard throttle body is bolted to box on the drivers side. The standard vacuum hoses go to the standard upper inlet. You are removing the standard upper inlet so the vacuum hoses hove got to go to the performance inlet. | |
Jenko_Sport |
posted on 17th Mar 07 at 15:23 |
So where do the vacume pipes come from off the standard inlet and can the standar throttle not just be bolted on? | |
Scotty C |
posted on 17th Mar 07 at 15:21 |
Pic's in my garage if there any good to you. | |
C4RL0 |
posted on 17th Mar 07 at 15:18 |
Well, you need a throttle cable bracket and somewhere for the vacuum hoses to plug into. That's it. | |
Jenko_Sport |
posted on 17th Mar 07 at 15:16 |
So nothing else is needed then apart from the inlet box? | |
C4RL0 |
posted on 17th Mar 07 at 15:14 |
Well all you to make yourself is the actual box. Then you use the lower inlet of an X16 and the standard throttle body. | |
Jenko_Sport |
posted on 17th Mar 07 at 15:12 |
So what would you actually need to make one then? | |
ainsley_brader |
posted on 17th Mar 07 at 15:11 |
tb is mounted with 1 stud and nut and 3 bolts. | |
ainsley_brader |
posted on 17th Mar 07 at 15:09 |
Dont know if these help at all | |
graham16v |
posted on 16th Mar 07 at 23:54 |
I'm making my own inlet manifold like the mantzle copy's u can buy on ebay etc. |