Not logged in [
Login
-
Register
]
You Are Not Registered Or Not Logged In
Corsa Sport
»
Message Board
»
General Chat
»
Spraying alloys
» Post Reply
Post Reply
Who Can Post?
All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help
Andale Mono
Arial
Arial Black
Book Antiqua
Century Gothic
Comic Sans MS
Courier New
Georgia
Impact
Tahoma
Times New Roman
Trebuchet MS
Script MT Bold
Stencil
Verdana
Lucida Console
-2
-1
1
2
3
4
5
6
White
Black
Red
Yellow
Pink
Green
Orange
Purple
Blue
Beige
Brown
Teal
Navy
Maroon
LimeGreen
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
[quote][i]Originally posted by dna23[/i] :D sounds promising Rob :D be nice to see - what colour did u do them in the end? guide here: [quote] 1. Remove wheel(s) from car. 2. I completely washed mine first but this is optional. 3. Sand all surfaces to be painted with 320 grit sandpaper, spray off with hose and let dry. 4. Now, sand surfaces with 400 sandpaper until smooth. Spray off again with hose and let completely dry. (I bounced the tire up and down and then let sit in sun to dry) 5. Mask off tire. I used masking tape and it sucked, couldn't get it to stick very well. I heard duct tape works also. 6. If using primer, follow instructions on can for application. 7. After primer has dried (if used) start with very light coats of paint. I used Dupli-Color Wheel Paint (graphite). 8. After every coat, i waited 10 mins inbetween coats, and an hour after the fourth and final coat. 9. Clear coat can be used after the paint to bring out the extra shine. I didn't use any. Follow directions on can. Number of coats is your choice. Enjoy the new look of your rims! [/quote] help zone :boggle: [/quote]
Post Options:
Disable smileys?
Turn BBCode off?
Receive email notification of new replies?
This is a long topic, click
here
to review it.