does the speedo/revs work?

wel i tried the fog and fuel ones, on both, and now i "think" its working, the fuel guage shows were abouts i think it should be, so fingers crossed, and the EML comes on, and then goes off once started so :)

my digidash didnt have a fog light tell tale, i had to bodge one in. and even when i tried to use the foglight wire it didnt work, had to wire it direct to the switch.
cant remember the fog light and fuel being the same colour, or maybe i was just lucky and got it right :S

lol but in answer to both your questions, the car has about 1/4 of a tank, shouldnt be on red. and i've just got some new bulbs so gonna go chek them now

right i've read the wiring diagram in the haynes manual, the fuel guage wire is the same as fog lights, and when i switch fogs on, the light on the dash dont come on, so i'm guessing there wired wrong.

all is then sorted apart from the ECU light. the 2x brown and blue wires are for "engine warning light" but there isnt anywere for them to go to, and i've cheacked http://windmill-farm.co.uk/digidash/ and that has the browna nd blue as ECU light, but doesnt have anywere on the plugs for them, so i'm stuck with that one? what did you do rob, or you just left it?

i realy need the EML as the xe aint long been put in, and EML could save the car from breaking badly :(

have the bulbs blown ???

does the car have any petrol in? or have u not got the petrol guage wired up?

oil light is on the dash fool, one at the top above battery.

does speedo work or what?

just turned her on, but this is all i get, and i dont get any lights at the bottom, like andbrake, EML oil light?

all i'm left withnow on the corsa loom is,

2 x brown and blue wires
black and white
black and gray

maybe the brown and blue are there instead of green and blue which should match to the astra plugs.

anyone ??

quote:

---

Originally posted by RobHayes
i've got a guide for how to fit it into a corsa b/tigra using astra bits etc, its in german, but got lots of pics.
can email it if required?

rob

---

i've got a guide for how to fit it into a corsa b/tigra using astra bits etc, its in german, but got lots of pics.
can email it if required?

rob

well i've done this, and there seems to be 2 blue/brown wires :o now one is the ECU whats the other for :o doesnt say on the help guide or the wiring diagram :o

Yea, cut the Corsa plug off completely and replace it with the Astra clocks plugs...

[Edited on 03-09-2005 by ed]

do i cut the whoile plug off the corsa dash, and then conect them wires to the other plugs? as there is 2 plugs with the astra and only one on the corsa :o

or info light like the green indicator arrows

the dash warning light

and what is a telltale supposed to be :o

:o

so i get the old clocks out, cut the plugs, then use that diagram to conect the wires to the plugs on the astra gte clocks. then hey presto :o ?

I used that in conjection with the guide in HZ, there were a few pointers with regards on what to wire the indicator tell tales too nd in what order to wire everyhing up in....

ed your a star :thumbs: thats the link i was looking for, just couldnt remember where i seen it lol :thumbs:

All you do is connect the wires colour for colour using my wiring diagram - http://www.windmill-farm.co.uk/digidash

dont say look in the helptopics, coz it isnt really a very good guide :rolleyes:

could do with a proper step by step guide and wiring diargram if possible.

anyhelp appriciated :D