corsasport.co.uk
  Not logged in [Login - Register]  
You Are Not Registered Or Not Logged In  

Corsa Sport » Message Board » General Chat » Removing your bonnet? » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help
Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

Pickup

 posted on 28th Apr 04 at 13:02

ok. thanks for all replies guys, much appreciated.
david

[Edited on 28-04-2004 by Pickup]


GIBBS

 posted on 28th Apr 04 at 12:55

quote:
Originally posted by Pickup
i have a valid point for asking here, the post is not specific in the mannor.

* Daimo B says : Think they are 10mm, or 13mm.

know what i mean?


he mean's they are either 10mm or 13mm.

Matt


Pickup

 posted on 28th Apr 04 at 12:47

i have a valid point for asking here, the post is not specific in the mannor.

* Daimo B says : Think they are 10mm, or 13mm.

know what i mean?


ed

 posted on 28th Apr 04 at 12:44

:lol:


Pickup

 posted on 28th Apr 04 at 12:43

so you saying both will do it? or your not sure if it is a 10mm or 13mm?


Daimo B

 posted on 28th Apr 04 at 12:40

10 or 13mm as i said.


Pickup

 posted on 28th Apr 04 at 12:39

does anyone know the exact torque size to get it off, ive got a set and one is too big, ones too small, aint got one to fit right :boggle:


Joff

 posted on 28th Apr 04 at 12:21

Mark on the underside of the bonnet the hinge outline.

Pull the washer jet hose away from the motor.

Undo the bolts that hold it onto the hinge.

Done.


Daimo B

 posted on 28th Apr 04 at 12:20

Think they are 10mm, or 13mm.

Open bonnet, look at pivots, undo x2 bolts that attach the pivots to the bonnet on both sides. Off it comes.

Would advise having another person about to hold it.

Doing it up, just do it hand tight, no torque settings.


Pickup

 posted on 28th Apr 04 at 12:14

Can anyone tell me where i should remove it from (ie which nuts/bolts to undo) and what tools will a need and what size when it comes to torques (if needed) ?
thanks :thumbs: