|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » General Chat » Wheel Refurb Advice » Post Reply
|
Charlton |
posted on 8th Dec 07 at 18:20 |
i used a black and decker mouse with different grades of sand paper saves loads of time and came out ok on my 3 spokes:thumbs: | |
2ltrjim |
posted on 8th Dec 07 at 17:29 |
used aerosol etch primer on mine. decent coat then your final coat.they looked ok | |
TheCam |
posted on 8th Dec 07 at 11:40 |
http://www.intercorsa.co.uk/board/viewthread.php?tid=363567 | |
leekeefy |
posted on 8th Dec 07 at 11:35 |
i'd nitromors them then rub down with 320 grit wet and dry with water. | |
Mark.W |
posted on 8th Dec 07 at 11:04 |
cheers mate | |
Mark.W |
posted on 7th Dec 07 at 20:45 |
yeah got half a wheel done today getting all the blister bits smoothed down and level and that took me overs 2 hrs lol but i started with the worst wheel so that one is out the way quickly.i now just need to rub the rest of the wheel down now. | |
Nick-S |
posted on 7th Dec 07 at 20:24 |
take plenty of time to prep them, eg, rubbing down | |
Mark.W |
posted on 7th Dec 07 at 20:23 |
hi i am currently have some corsa sport 3 spoke alloys that im going to be painting as they have a bubbleing spots on each wheel that im rubbing down at the min.i bought these for the winter but still want them to look decent. |