|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » General Chat » Wireing Problem i think ??? » Post Reply
|
Andy4k |
posted on 19th Nov 05 at 15:49 |
found out what the problem was it was the egnition module the second round relay thing behind the egnition :) | |
Col004 |
posted on 17th Nov 05 at 17:15 |
never had them probs mate, that earth is just the engine side of the loom. as for your problem with the rad and heater blowers....they both work from the same relay and they are sittuated behind the glove box so maybe that is sticking. or like muppetsport said could be a dead altinator if the engine is conk'd as well | |
Andy4k |
posted on 17th Nov 05 at 16:34 |
col and did yours start up alright and drive but ya heaters in ya car didn't blow and ya fan on the radiator wouldn't work so if ya drive it, it will over heat because no fan? | |
Nic Barnes |
posted on 17th Nov 05 at 13:10 |
dead altinator? | |
Col004 |
posted on 17th Nov 05 at 13:07 |
not that i can think of mate, the above what i said is what happened to me when i had my 1600 before i put the LET in :) | |
Andy4k |
posted on 17th Nov 05 at 12:11 |
is they any other possibilites i could check at the same time? | |
Col004 |
posted on 17th Nov 05 at 11:11 |
when you fitted the mantzel, there is an earth lead which used to go on the old inlet and is now re-possitioned to the head were the throttal body used to be, if its any were eles that is not effective enough, with the cold weather if this earth lead gets any moisture on it, it cuts the car out as its the main earth for the coil pack. | |
Andy4k |
posted on 17th Nov 05 at 11:02 |
??? | |
Andy4k |
posted on 17th Nov 05 at 01:18 |
no had to be pushed | |
VegasPhil |
posted on 17th Nov 05 at 00:49 |
Does it turn over? | |
Andy4k |
posted on 17th Nov 05 at 00:35 |
??? | |
Andy4k |
posted on 16th Nov 05 at 23:41 |
hello i have a corsa 1.6 gsi with manzel manifold and shit loads other engine mods and a was driving it today when the in car heater started cutting out then died then radiator fan died and batt seemed deadish any1 have any idea's? |