|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » General Chat » what ELSE COULD BE LEAKING ON XE!!! » Post Reply
|
Andy GSi |
posted on 11th Mar 05 at 15:29 |
quote: i had the engine steam cleanede the other day, and the bottom of the gearbox is as it was:mad: just the back of the engien is hard to see behind! will have a look tomorrow. i wouldnt mind a bit leaking, but my drive is like a bloody cole mine! :lol: | |
Stu |
posted on 11th Mar 05 at 15:23 |
My crank sensor seal used to leak but thats at the front of the engine? | |
Siberia |
posted on 11th Mar 05 at 14:48 |
is there a crank case breather pipe going to the back/bulkhead side of a c20xe? there is on a c16xe mine was p1ssing oil out of there.... | |
bradfincham |
posted on 11th Mar 05 at 14:37 |
torque settings in the book | |
GED2.0CORSA |
posted on 11th Mar 05 at 14:35 |
i might have the same problem , but i was thinkin i over tightened the sump plug and f*cked the cooper washer ??? | |
TNM |
posted on 11th Mar 05 at 14:29 |
brad beat me to it. | |
3CorsaMeal |
posted on 11th Mar 05 at 14:27 |
my 14XE was leaking from the filler cap :boggle: | |
bradfincham |
posted on 11th Mar 05 at 14:26 |
i cant see it leaking that much, mine has a leak, about a 5p sized blob after 2 weeks standing still, i dnt worry about it | |
Ditch |
posted on 11th Mar 05 at 14:23 |
courtney charged £300 to change the oil pump gasket :! :! :! | |
iceman |
posted on 11th Mar 05 at 13:19 |
not sure i got courtenay to do mine cost me 300 quid for a £3 seal lol | |
Andy GSi |
posted on 11th Mar 05 at 13:18 |
we made sure the bolts werent tighten up loads, put some seal on the gasket too. how hard is it to do the oil pump? | |
iceman |
posted on 11th Mar 05 at 13:17 |
rocker gasket if you have over tighten the bolts | |
Andy GSi |
posted on 11th Mar 05 at 13:15 |
right, these are the things which i have replaced: |