got it all sorted. its for the secondary air pump and egr. does ny1 no where what to use to plug the egr at the exhaust manifold?
should be up and running soon :D

only thing i can find on EPC is somthing to do with EGR valve
need a better pic

yeah ma bad, was trying to get quick help as was doing it last nite n wanted it finished,
yeah the one with the vacum pipe one goes to fuel valve other to that thing:boggle: above manifold

the one with the vacum pipe on it

(this should be in Help section)

next to the red wire, will it matter i dont have it?

stolen pic
http://www.corsasport.co.uk/carimages/1232/dscn0911.jpg

one of the connectors should go into the small valve type thing on the right hand side suspension turret

Post Pics
could be air con as said

will try put up some pics later, there are two in the engine bay behind the left headlight, at the battery, last connectors on the loom

put up some pics.... there should be 1 left in the car by the ecu... it for the air con....

[Edited on 08-02-2005 by Siberia]

pic sent

yeah but only on the camcorder and dont no how to load it up/cant be arsed workin it out. got pic on my mobile?

shouldnt be a plug into the power steering i would think, plugs go into rad at bottom left, rad fan, lambda hmmmmmm got any pics of said wires?

its in the engine bay. imobiliser may cause problems aswell

which end? inside or in the engine bay? have you fitted the transponders etc to the ignition barrel?

last question (i think) is it ok to have 2 connectors left at the end of the wiring loom, think they are for power steering which i have removed
cheers