|
Davidkent
|
posted on 1st Jul 09 at 14:55 |
Yeah matey the pics would be most helpful!
davidkent89@gmail.com if its easier :)
Cheers
|
ckallis500
|
posted on 1st Jul 09 at 12:28 |
ok no probs if u cant get one then this ones allways here.
if u want pics of the digi dash connectors let me know and ill send u some of mine for reference
chris
|
Davidkent
|
posted on 1st Jul 09 at 11:49 |
Ok mate, fair play.
I'm trying to find one locally, it kinda makes sense, but i'll let you know.
Apparently the connectors are the same as a cavalier.. so will see :)
Cheers :)
|
ckallis500
|
posted on 1st Jul 09 at 11:47 |
£20 is cheap if it works, but you may find it near impossible to find the digi dash connectors...
loom is about if u need it, its down Fazza's at mo. postage is gonna be a fiver and gotto wrap it, may do a little less but not much
|
Davidkent
|
posted on 1st Jul 09 at 11:42 |
I paid £20 inc postage...
I need the connectors for the back or something though? - Or do i, because i wire them up myself?
God knows, will find out when it gets here lol..
I needed a transducer anyway, and its included :)
was hoping for a cheaper start and charge loom tbh - I'm down to peanuts left..
Lost my job :(
|
ckallis500
|
posted on 1st Jul 09 at 11:41 |
u didnt pay alot for the digi dash did u? i have one for sale cheap thats all.
gotto dig it out but looking at £15 posted
|
Davidkent
|
posted on 1st Jul 09 at 11:26 |
Got some driveshafts, though not proper ones as i was promised, and hubs...
Just bought a GTE digital dash with transducer included...
Don't have enough cash for the Spark and Cam covers just yet, but how much for the 16v loom?
Cheers
|
ckallis500
|
posted on 1st Jul 09 at 11:16 |
Speedo Sensor (All necessary bits to plug to loom?) from Gearbox - To fit an F20 Box and XE Loom for Conversion
Cam Belt Cover - XE Early type Dizzy
Spark Plug Cover - XE
16v Start and Charge loom
also have xe manifolds, xe driveshafts, xe mounts. and loads more
|
Davidkent
|
posted on 30th Jun 09 at 17:31 |
Might have just got the sensor matey, and need a 16v start and charge loom first i think - I've more or less ran out of cash!
will let you know
Cheers buddy
|
GregGsi
|
posted on 30th Jun 09 at 13:45 |
Speedo Sensor (All necessary bits to plug to loom?) from Gearbox - To fit an F20 Box and XE Loom for Conversion
Cam Belt Cover - XE Early type Dizzy
Spark Plug Cover - XE
i have all this 40 posted for the lot
|
Davidkent
|
posted on 29th Jun 09 at 17:14 |
Updated!
|
Davidkent
|
posted on 27th Jun 09 at 18:49 |
And yeah - Bought a type 2 kit mate :)
Cheers
|
Davidkent
|
posted on 27th Jun 09 at 18:35 |
Whats the round tooth setup mean? lol..
Speedo sensor is everything I need ready to plug in and go - straight into the box, nothing else needed - and this just plugs into my Xe loom?
16v Start and charge - Any chance of some pics of the Main connector so i can compare it to mine?
Got any of the other stuff i need so i can save postage? lol
|
ckallis500
|
posted on 27th Jun 09 at 17:42 |
you all good for engine mounts?
i have early xe (round tooth setup) cam belt cover Alloy type so ideal for powdercoating or polishing.
transducer (speedo sensor) with plug and length or wire.
corsa 16v start/charge loom.
let me know if interested. thinking around £40 all in delivered
|
Davidkent
|
posted on 27th Jun 09 at 16:47 |
Thread edited - Bump
|
Davidkent
|
posted on 26th Jun 09 at 09:31 |
Replied buddy :)
|
dalehalket
|
posted on 25th Jun 09 at 16:47 |
u2u'ed u about other bits i have.
|
Davidkent
|
posted on 24th Jun 09 at 12:41 |
Nice one :)
|
dalehalket
|
posted on 24th Jun 09 at 09:28 |
think ive got one. il check when i get home from off shore on monday
|
Davidkent
|
posted on 23rd Jun 09 at 15:44 |
As above really..
Hoses for an XE Engine, I need the ones that split on the back and the side of the block and any other little bits i'll need.
Speedo Sensor (All necessary bits to plug to loom?) from Gearbox - To fit an F20 Box and XE Loom for Conversion
Cam Belt Cover - XE Early type Dizzy
Spark Plug Cover - XE
16v Start and Charge loom
Conversion Exhaust (I already have Manifold)
I have lots of bits in classifieds to swap if needs be too!
Anything else i'm likely to need for an XE Conversion :)
[Edited on 27-06-2009 by Davidkent]
[Edited on 29-06-2009 by Davidkent]
|