|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Classifieds » Parts Offered » fs- gas flowed head and cams » Post Reply
|
starkie |
posted on 31st Oct 03 at 17:46 |
u2u ent | |
gsi-gaz |
posted on 31st Oct 03 at 11:50 |
u2u sent! | |
gsi-gaz |
posted on 31st Oct 03 at 11:38 |
wud i need the head and cams, or could i just ge the cams? | |
junior |
posted on 31st Oct 03 at 10:14 |
bump | |
junior |
posted on 29th Oct 03 at 19:01 |
its a (x16xe) 1.6 16v | |
RobHayes |
posted on 29th Oct 03 at 18:54 |
wot engine is it?? | |
Karnage Corsa |
posted on 29th Oct 03 at 18:52 |
U2U Sent | |
junior |
posted on 29th Oct 03 at 18:48 |
well mate i have the whole engine and gearbox and loom and ecu and everything needed to convert.but the engine is needing a new piston and liner which would cost £200 to fix if your interested you can have the whole lot for £350 as i would rather someone got the use out of it. | |
RobHayes |
posted on 29th Oct 03 at 18:44 |
wot about on a 1.4 16v? i have 1.2 16v at the minute and am looking to upgrade, head & cams wud make a nice addition | |
corsa_godfather |
posted on 29th Oct 03 at 18:10 |
see my new car nick???look in general section.a got a bargain | |
junior |
posted on 29th Oct 03 at 18:09 |
these are flywheel figures of course but it's a fair hike from the measly 106 bhp it came from the factory with. | |
junior |
posted on 29th Oct 03 at 18:07 |
yea it was rather swift the cams made the biggest difference with just the cams and a full exhaust and filter i had 136bhp and 104 lbft. | |
corsa_godfather |
posted on 29th Oct 03 at 17:56 |
he had 1.6 with all that in and it was sittin at 148bhp.well worth the money.its very fast i tested my self ;) | |
RobHayes |
posted on 29th Oct 03 at 16:57 |
wot sort of power gains wud i be looking?? | |
Stu_22 |
posted on 28th Oct 03 at 23:59 |
will they go on my V6 :lol: | |
junior |
posted on 28th Oct 03 at 23:00 |
thanks for that mate yea as he said these are only for the 1.4 16v and the 1.6 16v engines. | |
SetH |
posted on 28th Oct 03 at 20:13 |
the above head and cams are for the 16v engines only. you would need to get your 8v head gas flowed, as for cams the 16v has 2 and inlet and exhaust cam, the 8v engine only has a single cam so again you would need a different cam. | |
broadley |
posted on 28th Oct 03 at 19:56 |
how about the 1.4 8v sri engine?how much gain do you get from them? | |
junior |
posted on 28th Oct 03 at 12:19 |
no mate they are for the 1.4 and 1.6 16v engines. | |
highlander |
posted on 28th Oct 03 at 09:04 |
Will the head and kams fit a cavvy gsi 2l 16v engine? | |
junior |
posted on 28th Oct 03 at 00:01 |
panther motorsport gas flowed head complete with three angle spiral cut valves and three layer head gasket. £170 |