All Parts Below Are Brand New..
http://www.migweb.co.uk/forums/projects-restorations/396308-project-calibra.html
Nortech Exhaust Mainfold with Garrett GT3071r
Spec
Garrett GT3071r
Turbine Housing A/R: .82
Style : T3 Inlet 4 Bolt GT 3" Discharge
External Wastgate
Compressor Inlet Diameter: 4 inch
£1500
Nortech C20LET Inlet Manifold with Billet Throttle Body 70mm, Billet Fuel rail with-8 fittings.
Sold pending payment
Tial 44mm External Wastegate
£300
Tial 50mm Blow Off Valve
£200
INN3781: Innovate XD-16 Standalone (Gauge & LC-1) with Heat-Sink Bung
The XD-16 ships as an Air/Fuel Ratio gauge, but can also be configured to display any channel in the MTS chain or it can be connected to the LM-1. The XD-16 features programmable LED colors and a remote control button to start and stop log sessions, initiate calibrations, or view min/max values.
2 Bezels + 8 faces = 16 combinations (see below)
3/4” thick, so it's possible to mount even in surface mount configurations
Fits 52 mm (2-1/16") gauge pods
3-character LED display
Record/Calibrate/Peak Hold button
Programmable (values and colors) digital needle
Billet Aluminum bezel
The basic kit ships with both black and silver bezels, 8 faces (AFR, Pressure, Temperature, and blank).
£280
Apexi AVC-R Boost controller (used)
Sold Pending Payment
GOTECH-MFI PRO X
Spec
Gotech PRO X Information and Features
Applications:
One, Two, Three, Four, Six and Eight Cylinders with distributor and single coil or coil packs
Trigger per event, 60-2, 12-1, 24-1 and TDC pickups
Various setup combinations available:
- 4, 6 and eight Cylinder, One coil and two injector outputs with trigger per event input
- 4 Cylinder, Two coil and Two injector outputs with crank trigger (60-2, 36-1, 12-1)
- 6 Cylinder, Three coil and three injector outputs with crank trigger (60-2)
- 4 Cylinder, Full sequential Four coil and four injector output (60 -2 plus hall effect TDC)
- 6 Cylinder, Full sequential fuelling and phased ignition (60 -2 plus hall effect TDC)
- 8 Cylinder, Single coil and distributor
- 8 Cylinder, Single coil, full sequential injection (60-2 plus hall effect TDC)
- 8 Cylinder, Two distributor, Phased sequential fuel (60 -2 crank pickup Lexus 1uz)
- Mazda Rotary Twin and Triple rotor engines (24 -1 Distributor pickup)
2 Gpo outputs can be used for idle control or VVT or boost control.
Dedicated fuel pump output
Dedicated shift light
Launch control (Launch rpm limit, Launch timing retard, Launch time delay)
Anti lag available on request
Gotech Mfi Pro X ECU (new slim line)
Gotech Mfi Pro X semi dressed universal loom
Lead for Laptop
Fitting instruction booklet & C.D
Base map C.D
£675
C20LET 87mm JE pistons with Pro series Rings, Pins, Clips, 8-5-1 Comp with Steel Rods & Arp 2000 Rod Bolts
£750
C20LET/C20XE Cometic 2.3mm Head Gasket 5 Layer
£120
C20LET/C20XE Arp's
C20LET/C20XE ARP head stud kit ARP Part Num 209-4301 £110
C20LET/C20XE ARP main stud kit ARP Part Num 209-5401 £90
C20LET/C20XE ARP flywheel Bolt kit ARP Part Num 209-2801 £35
GM Z20LET Oil pump with modified pick up pipe made From Stainless Steel, bigger bore pipe, fully Tig welded, with CNC Oil Pump Flange to fit the C20LET engine With block girdle
£375
660cc Injectors@ 3 bar
High Imp
Bosch Style fitment no connector’s or plugs required.
£300
Aeromotive A1000 Fuel Pump Kit (4 part)
Aeromotive A1000 Fuel Pump, P/N 11101
This is the pump that started it all. Durable, reliable, good looking and it supports high horsepower. Perfect for the daily driver that doesn't run like a daily driver.
Fuel Injected Engines:
up to 1300 HP - naturally aspirated
up to 1000 HP - forced air induction
Carbureted Engines:
up to 1500 HP - naturally aspirated
up to 1200 HP - forced air induction
Aeromotive A1000 Injected Bypass Regulator, P/N 13101
Performance EFI regulators designed for medium to high horsepower applications. Both regulators feature Aeromotive's high-flow design, superb pressure control and legendary durability. On the street and at the track, these pressure regulators have logged more miles, more laps and more passes than any other performance EFI regulators in the world!
Aeromotive 100 Micron (ORB-10) Fuel Filter, P/N 12304
An inexpensive insurance policy to protect you investment.
Proper filtration is key to fuel system performance. Engineered filter soutions are required to achieve protection with minimum restriction. For 200 - 3,000 plus HP applications, our filter assemblies offer unmatched flow, ease of installation and maintenance, along with the impeccable machining and finish you've come to expect from all Aeromotive components.
• All filter assemblies feature an O-ring for positive sealing in high pressure applications.
• CNC-machined from 6061-T6 aircraft aluminum.
• All filters feature serviceable filter elements.
• All of our filters feature pleated elements. (Pleats provide more fi ltration area, resulting in the least amount of pressure drop.)
Aeromotive Fuel Pressure Gauges P/N 15633 0-100 PSI
Aeromotive carbureted and EFI fuel pressure gauges
Aeromotive's new fuel pressure gauges are compact and accurate with a 1-1/2" in diameter stainless steel case, a crisp, easy to read white face with black numerals and of course, the Aeromotive logo!
Aeromotive*|*Serious Fuel Systems
£700
Roose Hose's
Sold Pending Payment
21 row oil cooler
£70[/B
7 1/4 Inch Race Flywheel with ring gear & Helix 6 paddle Clutch Kit
184mm Single Plate Cerametallic Race Clutch
Heavy Duty 6 Paddle Cerametallic Sprung Faced Drive Plate
Clutch Release Bearing
£725
All Parts are plus postage Larger Item's to be collected from Wolverhampton
Tel 07962398027
More parts to be added soon if you need anything else from the calibra just PM me.
|
