|
moddedcorsa
|
posted on 3rd Jun 09 at 14:25 |
Now sold,
|
moddedcorsa
|
posted on 1st Jun 09 at 14:41 |
bttt
|
gh227
|
posted on 26th May 09 at 22:25 |
U2U sent
|
NeilGSI
|
posted on 25th May 09 at 23:14 |
would you sell the manztel?
|
moddedcorsa
|
posted on 25th May 09 at 21:39 |
u2u sent,
Im located near Oban, postcode PA38
|
mar_cus
|
posted on 19th May 09 at 15:06 |
Im probably blind, but where are you located? Whats the start of your postcode :)
Cheers
|
dalejones
|
posted on 19th May 09 at 01:04 |
bump for the smartest gsi engine ive ever seen :P
|
moddedcorsa
|
posted on 18th May 09 at 16:41 |
quote: Originally posted by DjNoVa89
alright m8 would this drop into a corsa easily? without to much fukin about? lol
once your old engine is out, it would be a case of bolting your gearbox and metal/rubber mounts on
connect fuel pipes/exhaust
its a corsa wiring loom, so plug it all in, remove the kick pannel below dash, remove old ecu, connect up 8 wires (colour for colour, all labeled anway)
and thats about it (you wil need a mpi fuel pump if your car doesnt have one, but that just slots into the fuel tank):thumbs:
|
sri_baby
|
posted on 17th May 09 at 19:09 |
if only i had the money and if only i woz keepin my corsa :(free bump tho 4 one hell of a engine :)
|
DjNoVa89
|
posted on 17th May 09 at 17:41 |
alright m8 would this drop into a corsa easily? without to much fukin about? lol
|
moddedcorsa
|
posted on 17th May 09 at 17:04 |
Alot of interest, no takers yet though
|
moddedcorsa
|
posted on 15th May 09 at 17:35 |
C16xe 151bhp for sale
Hi, My mate was splitting his rally car, so I ended up buying his engine.. So my other engine is now for sale.
Bought it at the end of 2006 with supposedly 40K miles on it with the cams, head, mantzel (no proof of milage, but all the water pipes/oil ways etc were spotless)I Cleaned/painted it, fitted new manifold/rocker/sump gaskets, and fitted to my car early 2007.
Winter 2007 saw some more modds and a wee rebuild (just because it was out the car)
Spec as it stands:
C16xe
Stage 2 gas flowed c16xe big valve head (getting rare)
Valves lapped and new stem seals fitted
Piper BP270 cams
Cam pulleys painted red
Mantzel inlet plenum/powerbox
Gm pistons with valve pockets deepened (using sbd’s dimensions) to accept bigger cams in the future (new piston rings)
Arp Con rod bolts
New shells/con rod bearings.
Lightened and balanced bottom end
Alloy sump
Flat lighter flywheel with new Sachs heavy duty clutch
Std 4-2-1 manifold and down pipe
New water pump,timing tensioner, idler rollers and belt
Mantzel chipped ECU with 7.3K rev limit
Wiring loom (Feed wires have labels on them saying what they are)
Flame red rocker cover with Custom alloy spark plug cover
Custom small oil cap painted black
Stainless crank case breather
Cone filter
Most hoses needed to fit to a nova
Flat multi rib type lower pulley, belt(spare new belt included) and multi rib altenator
NOTE: Doesnt have V-pulley altenator or loweing bracket.(I will include V-belt lower pulley, and mounting bracket for a V-pulley altenator if you wanted to fit one)
Gearbox and linkage not included
Since buying ive done 5k miles (3K since the rebuild)
Got it rolling roaded at a migweb rolling road day (I got biggest percentage power increase, and car of the day:
Made 151bhp @ 7224 rpm, 118.9 lbft @ 5897rpm
It was making power right up to the redline, and raising the rev limit further would result in more power.
This engine really is like new, everyone thats seen it/drove it comments :D
A few pics of the rebuild:
Pistons:
Fitted with ARP conrod bolts:
Flat type flywheel (lighter than std pot type)
Then new sachs clutch, release bearing and box bolted to block.
Setting the timing, and bolting everyting back on with new seals, gaskets, bolts etc.
Looking for £800 (i paid more than this for the engine, and have spent alot of money on it since)
I work shifts, so may not get back to you straight away:wave:
Located near Oban, postcode PA38
Could possibly deliver within scotland for fuel money:)
[Edited on 25-05-2009 by moddedcorsa]
|