QX4150 Output Power:
300w x 1
150w x 2
60w x 4
Gold plated signal input
RCA jacks Unique chrome powder coated finish
Die-cast gold plated logo badges Isolated mounting feet QLINKable
Frequency Response +/-1dB, 20Hz to 20 kHZ
Signal to Noise Ratio (A-weighted) >100dB
Max Continuous Bridged Power @ 1% THD 150 watts x 2 into 4 ohms @ 14.4 Vdc
Max Continuous Power per Channel @ 1% THD 75 watts x 4 into 2 ohms @ 14.4 Vdc
Nominal Continuous Power per Channel @ 1 % THD 60 Watts x 4 into 4 ohms @ 14.4 Vdc
IASCA/USAC Power Rating 50 Watts x 4 into 4 ohms @ 12.5 Vdc
Minimum Load when Bridged 4 Ohms
Minimum Load per Channel 2 Ohm
Input Signal Voltage Range 0.1 volts to 2 volts
Crossover Type Cont. Variable Linkwitz Riley HP,LP
Input Impedance, Standard/Balanced 12kOhms, n/a
Crossover Slope 12 dB per octave
Crossover Frequency Range 90 or 125Hz Highpass / 30-600Hz
Lowpass Factory Crossover Setting 90Hz Highpass
Hi-level Input yes (US models only)
Bass Boost 0- to +15dB @ 45 hZ
Power Supply Voltage 10Vdc to 15.5Vdc
Recommended Fuse 40 amp
Dimensions 14.86L x 8.50W x 2.10H
-----------------------------------------------------------------
ŁOffers
[Edited on 22-10-2005 by Phil W]
|
