Will do jed cheers :D

get onto david dixon (local lad) for the mounts and that mate :thumbs:

Cheers mate all I have at the min is an engine and loom need an ecu transponder
And chip and all the rest of the stuff to do it I will be starting to do it at the end of the month
So will buy bits off you can you u2u me a list of parts you have please mate cheers

i have loads of bit for sale for a v6 conversion if you get stuck for out

you need a cable gear box mate with a redtop fly wheel and clutch coz you can't use the hiydrolic pedal and it have to sash the bulk head back on the driver side all so you need to cut the back manifold so it dosn't hit the steering rack if ya need any more halp just give is a u2u

Right people av got a 2.5 v6 to go in my 1L b av never
Done a v6 conversion before so can any1 help or just some advice
On to what box and flywheel to run were to get mounts from and what body
Mods will I have to do for it to fit in the hole cheers guys