|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Regional Groups & Events » North East » Conversion help » Post Reply
|
davec495 |
posted on 9th Nov 11 at 18:29 |
Do you know if the x14xe uses a sachs pressure plate because thats what I removed and changed it for an ebay one for the x14xe and wouldn't disengage not sure if its had a different flywheel put on its confusing the hell out of me cheers for the help so far | |
Linch |
posted on 9th Nov 11 at 18:23 |
Stick with x14xe one | |
davec495 |
posted on 9th Nov 11 at 18:16 |
Would the 1l flywheel and clutch also fit or will I have to stick to the x14xe ones thanks for your help | |
Liam-Wilko |
posted on 8th Nov 11 at 15:37 |
thats mint good info to have lol i really can imaging it being quick of the mark i seen my mates saxo vts with a 1.1 box on it and it flew off the mark like | |
Linch |
posted on 8th Nov 11 at 15:36 |
Yep same bell as all smallblock cars. Quick of the mark. Different final drive ratio. | |
Liam-Wilko |
posted on 7th Nov 11 at 18:35 |
I can only imagine that using a 1lt box will give ya mint acceleration but will dramatically reduce top end | |
davec495 |
posted on 7th Nov 11 at 17:48 |
I used a f13 cr that use to take off but cant find half off the gears and was pricey to run on a motor way run | |
Liam-Wilko |
posted on 7th Nov 11 at 17:42 |
Linch I didn't know ya could use a 1lt box on a sport engine can imagine that it will pull like a train from stand still | |
davec495 |
posted on 7th Nov 11 at 17:14 |
Thanks I will have a look do you use standard engine mounts was it you who I got the gsi shell from a few years ago silver and black | |
Linch |
posted on 7th Nov 11 at 17:06 |
You can use 1.0 box. There's a guide for wiring too on here in the guides section. | |
davec495 |
posted on 7th Nov 11 at 16:53 |
Hello after been baffled by gearbox problems on my x14xe sport I bought a run about corsa 1l 12 volt.the run about has beter bodywork some was thinking about swaping the engines once I get a new gearbox or fixed this f13 cr one how hard of a swap is it to do could I reuse 1l gearbox any help would be great or if there is a guide about anywere thanks |