u2u'd back

you have u2u

250 or offers will swap for most corsa parts or if its worth money lollol:)

the ICV is cleanable buddy and CTS aint no biggie sure they can be had new for much cheapness...be aswell to take off thermostat housing and put a lower temp thermostat while were in that neck of the woods :)

If you do split it let me know laddie! Could do with replacing the CTS and ICV sensors just to see if it makes it run better!

i would split if everyone wanted bits and i'd make my moeny back on it :)

Would you sell any sensors seperate? :look: Worth a shot:lol:

early type engine is 7bhp up on standard
lighter fly wheel
lighter crank
better head
mahle pistons

*****Box Is A f16 btw folks*****

Shafts and drivers side mount and rubber are prov sold

white rocker and cam cover with red l piece

FP ECU

later manifold with lambda still intact

Early AFM

Early SFI box

Sensors all there

might get a couple of piccys the morra :thumbs:

£300 to get rid as father is moanin and a nother set of wheels and a cage and lights and door card that jsut bought are taking to much room :(

£300 to take her away :)

How cheap? I was thinking Newman cams but I'll look into Auto Sprint! I just want good power from it before I decide what engine's next:lol:

What cams are you thinking about??

Autosprint do good cams at very good prices.Tell him the spec of the engine and he will give you the best for your application.They are cheap too.

A boy called Jamesy from Ainster has u2u'd me about his Sportex and decat which I'd buy if it was for the XE. At least until I get a full system made up by Graiden at Stainless Creations! I've got a bike carb set up waiting to go on too, and my stand alone management is in the post. Once it's all together with cams (which I'm trying to source just now) and a decent mani should make it pretty nippy! The RR day was a good base point for me, even with it not running right. Had a MASSIVE misfire once on the roller, but still made 143bhp/142ft/lb so it's a fairly decent engine to start with!

Have you been keeping an eye on the classifieds on here and mig??Systems for XE Corsa's usually pop up quite often.
I got mine off here from a guy that competed in TOTB 09.Birchieboy iirc.

£220 for the Ashley mani and full 2.25" Powerflow system with decat.Was a perfect fit as it was made for a Corsa.

hi wht styling stuff have u got

I need a decat :( And an XE exhaust :lol: Then I should be making standard power!

Yeah thats just down to the cat.A decat sorts the power difference out.

The dispack will be a better design probably, bar the GM head (even though they aren't anywhere NEAR as bad as the rep they have) but it makes slightly less power as standard. A very small amount less but less all the same!

quote:

---

Originally posted by weddy1988
here we have my 20xe engine for sale engine is complete ready to drop in came out of a corsa gsi
includes:

complete 20xe including loom ecu gearbox manifold inlet sfi box ect

rocker and cambelt covers are in white and a good job aswell

the better engine with being the early type

not sure if its coscast or not had a look yet

Not fust about selling as will take the covers ect and sparay them put them on mines and swap with bits off my xe and sell at later date

Thanks Ross

---

Fancy selling the box ?

If the head has never been changed, then it will be a Coscast as they were on the early ones like ours laddie :thumbs: Cracking price btw.

milage? what about the shafts, do they come with it?

open to swaps for pritty much most things not desprate :)

mint speedlines?
good carb set up?
gaz coilover set-up would be nice
20xe tuning parts?
corsa styling parts?
Alpine 9887r headunit?

straight swaps money ethier way or straight up cash :)

here we have my 20xe engine for sale engine is complete ready to drop in came out of a corsa gsi
includes:

complete 20xe including loom ecu gearbox manifold inlet sfi box ect

rocker and cambelt covers are in white and a good job aswell

the better engine with being the early type

not sure if its coscast or not had a look yet

Not fust about selling as will take the covers ect and sparay them put them on mines and swap with bits off my xe and sell at later date

Thanks Ross

[Edited on 25-01-2010 by weddy1988]