|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Regional Groups & Events » Scotland » 20xe+f20+loom+fp ECU+mani+ ect !!!!£250!!! » Post Reply
|
weddy1988 |
posted on 26th Jan 10 at 12:56 |
u2u'd back | |
steviet |
posted on 25th Jan 10 at 23:07 |
you have u2u | |
weddy1988 |
posted on 25th Jan 10 at 17:27 |
250 or offers will swap for most corsa parts or if its worth money lollol:) | |
weddy1988 |
posted on 23rd Jan 10 at 19:11 |
the ICV is cleanable buddy and CTS aint no biggie sure they can be had new for much cheapness...be aswell to take off thermostat housing and put a lower temp thermostat while were in that neck of the woods :) | |
Eck |
posted on 23rd Jan 10 at 19:05 |
If you do split it let me know laddie! Could do with replacing the CTS and ICV sensors just to see if it makes it run better! | |
weddy1988 |
posted on 23rd Jan 10 at 19:02 |
i would split if everyone wanted bits and i'd make my moeny back on it :) | |
Eck |
posted on 23rd Jan 10 at 18:58 |
Would you sell any sensors seperate? :look: Worth a shot:lol: | |
weddy1988 |
posted on 23rd Jan 10 at 17:38 |
early type engine is 7bhp up on standard | |
Eck |
posted on 23rd Jan 10 at 09:09 |
How cheap? I was thinking Newman cams but I'll look into Auto Sprint! I just want good power from it before I decide what engine's next:lol: | |
Corsa_Sport21 |
posted on 23rd Jan 10 at 09:06 |
What cams are you thinking about?? | |
Eck |
posted on 23rd Jan 10 at 08:56 |
A boy called Jamesy from Ainster has u2u'd me about his Sportex and decat which I'd buy if it was for the XE. At least until I get a full system made up by Graiden at Stainless Creations! I've got a bike carb set up waiting to go on too, and my stand alone management is in the post. Once it's all together with cams (which I'm trying to source just now) and a decent mani should make it pretty nippy! The RR day was a good base point for me, even with it not running right. Had a MASSIVE misfire once on the roller, but still made 143bhp/142ft/lb so it's a fairly decent engine to start with! | |
Corsa_Sport21 |
posted on 23rd Jan 10 at 08:53 |
Have you been keeping an eye on the classifieds on here and mig??Systems for XE Corsa's usually pop up quite often. | |
sri boy |
posted on 23rd Jan 10 at 08:52 |
hi wht styling stuff have u got | |
Eck |
posted on 23rd Jan 10 at 08:46 |
I need a decat :( And an XE exhaust :lol: Then I should be making standard power! | |
Corsa_Sport21 |
posted on 23rd Jan 10 at 08:43 |
Yeah thats just down to the cat.A decat sorts the power difference out. | |
Eck |
posted on 23rd Jan 10 at 08:30 |
The dispack will be a better design probably, bar the GM head (even though they aren't anywhere NEAR as bad as the rep they have) but it makes slightly less power as standard. A very small amount less but less all the same! | |
Corsa_Sport21 |
posted on 23rd Jan 10 at 08:22 |
quote: Thats not true btw.:thumbs: Many actually say that the dis-pack is the better type as it has bigger injectors with a better spray pattern etc. Cracking price non the less. | |
Jordan C |
posted on 22nd Jan 10 at 19:56 |
Fancy selling the box ? | |
Eck |
posted on 22nd Jan 10 at 09:17 |
If the head has never been changed, then it will be a Coscast as they were on the early ones like ours laddie :thumbs: Cracking price btw. | |
sc0ott |
posted on 22nd Jan 10 at 09:00 |
milage? what about the shafts, do they come with it? | |
weddy1988 |
posted on 19th Jan 10 at 23:09 |
open to swaps for pritty much most things not desprate :) | |
weddy1988 |
posted on 19th Jan 10 at 22:22 |
here we have my 20xe engine for sale engine is complete ready to drop in came out of a corsa gsi |