yeah i would think ya would need to earth it!! if you cant find the side light wires in the loom ya can just run wires from the back of the head lights where the bulbs are fitted!!!!

OK CHEARS

ONE LAST question do u have to earth the foglights?

No, just pop the cover off, its straight forward and will take you 2 seconds to do.
I should think you can access the sidelight wiring in the headlight loom. Take a look under the rubber cover for the back of the headlights, you should see it there

SO U DONT HAVE TO remove all the light switches and stuff to get it out do u?

do u know hoe to get to the wiring for the sidelights

Same as Sam says, his answer wasn't showing when I did mine.

The blanking plate will just pop out with a small flat screwdriver blade. Have you already got the switch as I might have one here.

The blank one is just a little plastic plate thing.

ok am going to wire me fogs up soon and i want tp get hold of the front fog light switch that the gsi has. i am going to mount it above the rear fog light switch as it is currently blank. how do i do this? hod do i get the blank one out?

also do u know how to get access the side light wiring?