:boggle:

you're silly.

wtf u on about?

I find it quite funny that Austin edited his post, yet didnt change it to say he has FIVE options, instead of four :lol:

i take it your amps dont have outputs on them??

As for wiring it up, how have you go it?
From the sounds of it you have the back preout going to one amp (to power sub) then you have your front preout going to another amp (to power sub) then from this amp its daisy chained to another amp to power the front. Is this correct??
As you can tell im confussed lol

Dom

i have 2 pre outs austin but wen i connect 1 rca lead 2 the rear pre out it sounds fine then wen i cannect the other 2 the front 1 and then bk 2 the uva amp it soundz quiet ne ideas i gott kenny mask 8021 btw thanx peops

Indeed, to some it up you have five options:

1.Buy a line driver.
2.Use the pass through output (if your amp has it)
3.Buy a new headunit with more preouts.
4.Get an amp that runs both subs.
5.Live with it :lol:

[Edited on 28-10-2003 by AustinPXX]

The reason its done this, is because you are splitting the output preout voltage from the head unit - so if ya have 4v preout, each amp is getting 2v :(
There are things called line drivers (think thats them) that will boost the splitted voltage although, have you got outputs on the amps at all? If one of the amps had a pass-through or an output you can daisy chain the output from one amp to the input of the other...this would give you a best signal than splitting a preout :)

Dom

i have 2 amps and 2 subs and am running 1 sub of each amp i have bought and rca splitter thing so i can link both amps from 1 pre out but when i disconnect 1 rca lead from 1 amp so only 1 sub is running then it sounds so much better iz there ne way of having both subs running well wot av i dun wrong lol

plz help im a complete novice with ice many thanks

tom