|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » troubles with changing heater bulbs, help needed (asap lol) » Post Reply
|
sox |
posted on 31st Oct 03 at 15:38 |
should the heater illumination come on as soon as i turn the ignition on or have i done something wrong? | |
Cybermonkey |
posted on 29th Oct 03 at 08:28 |
quote: Yes after the 97 facelift, the assembly was built differently, and it is impossible to reach the bulbs without hacking it to pieces. A whole new console is needed if a bulb blows. Bloody rip off if you ask me. | |
Mo |
posted on 28th Oct 03 at 23:27 |
has anyone done this on a 98 sport cause it's meant to be different. Cobras guide say's he couldn't find where the bulbs went and mine needs replacing. :( | |
uprated |
posted on 28th Oct 03 at 22:10 |
i just did this today, it was a ballache, haynes manual is a necessity | |
sox |
posted on 28th Oct 03 at 20:33 |
how do i get the front black housing off? it seems to be clipped in so that it wont come out easily lol! so ill be replacing the bulbs from the front on the panel, rather than from behind? | |
mav |
posted on 28th Oct 03 at 20:22 |
Done mine on saturday. | |
mike_1.2LS96 |
posted on 28th Oct 03 at 19:48 |
btw, its easier it you take off the air ducts by undoing the torx screws and unclipping it (tricky bugfger to get off tho) | |
mike_1.2LS96 |
posted on 28th Oct 03 at 19:47 |
If you look carefully you'll see two torx screws (gold colour), its below this and just above the plug/cable for the center. It clips in four places, do the middle two first then the side ones. | |
sox |
posted on 28th Oct 03 at 19:22 |
ok, i have a corsa sri (1.4 M reg). |