i would have a look for you today but its in the body shop. U2U me next week if i havent replied!

well wen u get new rims tell me offset its writen on the back of the alloy it will say et then a number ef ET 45

195/45/15, dunno bout offset as they were on the car when i got it. Im getting 215/40/17 on new wheels next week tho :thumbs:

what offset and tyre size ?

quote:

---

Originally posted by ajscorsa
et 38 lol your fooked even if ya lower it only 40

---

lol cheers !!

In fact, in this pic, u can see how the rear wheels were cambered :D

15" rims
Lowered -40mm on the rear
rear wheels cambered
still scrubbed

Resolution: Remove rear seats, dont carry passangers :lol:

just do it!

at the very worst you'll have to do what??? get a new set of wheels? hardly a big deal is it!

well ill try 195/45/15 et 38 lowered -60 with inner arches cut and see wot happens unless sumone can say 100% DONT DO IT :)

MOT tests dont ever have the car on full lock

that mean it will fail the mot m8?

heres mine:





15" rims ET45 with 195/50/15 tyres. lowered -60mm
no scrubbage at rear with 2 people in the back. but the front wheels rub the inner arch liners on full lock

or alternativily you can camber the rear wheels by putting a washer on the bottom bolt(s) of the stub axle

where there's a will there's a way ;)

you can get away with et35 lowered 40mm as long as you have 195/45 profile tyres

you just need to remove the top two bolts from each arch and give the inner arch a good blattering with a rubber mallet

can i not just cut alot of the arch away ? and bond arches on and not take n e rear peopel

et 38 lol your fooked even if ya lower it only 40

u will get rubbing mate. i have et 38 with 195/50 tyres and i have had to grind away the plastic arch and i cant carry anyone in the back for no rubbing.

u got no chance mate

thanks peps that give me a gr8 idea of wot it will look like ! i will hav plenty of weight in the rear due to install so i hope theres no rubbing , on 195/45/15 et 38 !

not got any pics of mine but looks roughly the same as broster, just a little higher at the back with pi -60mm all round

here you go, its about 75mm at the back tho! but thats taken just after i lowered it so its more like 65mm ish! hope it helps

as title says pls can i see pics ? cheers :thumbs: