A1) Sensor' on all doors and bonnet.

A2) Cheaper insurance policy. :D

A3) Remote controlled.

A4) Got one, no idea what kind it is though. :boggle:

A5) To activate/deactivate it i have to point the remote directly at the censor on front windscreen. Would like to be able to switch it on and off from all angles.

quote:

---

Originally posted by avenger
mine has remote start, but i left the safety features on, cant start in gear

---

1. Break & entry detection via motion sensors. Bonnet sensors to alert alarm before tampering.
2. Detection from any form of entry to the car and also from bumps
3. Sensors on each door/boot/bonnet, interior sensor and tilt/motion sensor.
4. Clifford concept 300 with tilt/motion sensor
5. I would add a proximity sensor, so it would warn thiefs that the car alarm is aware of the presence and ready to sound. Also would like a bump/shunt sensor so alarm would sound if someone hit your car.

[Edited on 18-10-2003 by Sims]

one thing i find important on alarm systems is 'all black wiring' and multi-frequency if remote operated

1-Sensors on doors, boot and bonnet and motion sensor

2-As above plus immobiliser, tilt sensors etc etc

3-Via remote, which would also control central locking

4-I have an alarm

5-Wouldnt change it!

mine has remote start, but i left the safety features on, cant start in gear

Those cars with remote start on them... I suppose that means you have to leave your car out of gear all the time.
I tend to park with mine in gear.

Your not going to nick the cars are you?:lol::wave:

A1 Internal ultra sonics and bonet and boot sensor and engine immobiliser
A2 Shock sensors and tilt sensors
A3 Total closuir via remote control
A4 Cobra 47928/HF with remote total closuir
A5 I would change for that one where you can start your car via remote

more replys would be grateful cheers

1. Internal motion sensor and light on sensor

2. as above + all door sensors, tilt and dual stage shock alarm etc

3. remote operated

4. Toad 850 i think

5. Would add total closier aswell

a1: Should have sensors on every door, boot and bonnet.

a2: as above

a3: could switch it on as u get out and have a time delay (555 timer) till it arms.

A4: yes, toad c4

A5: would have tilt and motion sensors.

For my college course i have to produce a project i have chose to design a car alarm it must be technical enough but not costly an to advanced.

could you please take the time to answer a few questions an give any opinions cheez guys

please only respond if u have something genuine to say thanx again.


Q1) what do u think the main features a budget alarm system should have?

Q2) what would u want from a car alarm?

Q3) what functions an how would u like it to be operated ?

Q4) do u have an alarm an what alarm is it

Q5) if u have an alarm already but would change something about it what would it be

please leave ur answers below an thanx for you time