|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » re wiring, big job? » Post Reply
|
Melville |
posted on 12th Oct 03 at 19:01 |
they dont do a bloody haynes manual for the corsa c and when I emailed them they said they dont intend to in the foreseeable future - bastards | |
MikeLamb |
posted on 12th Oct 03 at 18:21 |
yer, but the haynes manual woill only show you how to wire what is allready in there, i wanna put a standard iso rather than the thing that is there as standard (im assuming its not as iso???) | |
Richie |
posted on 12th Oct 03 at 18:14 |
haynnnnnnnnnneeeeeeeessssss maaaaaannuaaaaaaaaaal | |
MikeLamb |
posted on 12th Oct 03 at 18:06 |
Im going to have to do this next weekend cos all the current wiring is screwed, does anybody have a wiring diagram for an iso connector, and what should be connected to the 6 other wires of the iso (apart from the 8 for the speakers and 2 for the power??) also where can i get a plug for the aerial as mine was just the wire held on with electrical tape :S Thanks, Mike | |
Kris TD |
posted on 12th Oct 03 at 17:40 |
its fairly easy to do if ure competant at diy. | |
Melville |
posted on 12th Oct 03 at 17:12 |
it tells you ont he back of the h/u what wire does what. Am if Im not mistaken it might even tell you on the wire what its for altho now I come to think about it, it might have been on my mates fiesta? lol | |
uprated |
posted on 12th Oct 03 at 15:28 |
i was having a good look today, and where the hell do the speaker wires join up to the back of the head unit? they just got lost in the tangle of wires, i am guessing that if i want to wire up some 6x9s for the back ill use the rear line outs with connectors straight into the back of the head unit? | |
brezzecorsa |
posted on 12th Oct 03 at 14:29 |
solder the ends of the new wire on to the end of the old wire and use the old wire 2 pull the new wire through! should work! if it dosent u havent lost anythink coz u were gona take ur dash to bits anyway!:thumbs: | |
Melville |
posted on 12th Oct 03 at 10:48 |
I wouldnt say its that hard to be honest, the only thing that you might find hard is taking all of the plastic trim off and stuff down the side of the doors. The glove box comes out no probs and you can take the drivers side to bits just as easy. | |
uprated |
posted on 12th Oct 03 at 06:51 |
great :( | |
DanielJ |
posted on 11th Oct 03 at 23:23 |
nop | |
uprated |
posted on 11th Oct 03 at 23:01 |
the wiring for my front and rear speakers is, well, shit |