|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Preouts » Post Reply
|
Richie |
posted on 11th Oct 03 at 14:36 |
U saw Mike, the spanner :lol: | |
kev_corsa |
posted on 11th Oct 03 at 14:23 |
ive just found a Phoenix Gold Tantrum TLD66 which I can put 6 channels through! | |
kev_corsa |
posted on 11th Oct 03 at 14:14 |
ive just got a standad one, but i want a motorised screen | |
kev_corsa |
posted on 11th Oct 03 at 14:14 |
ahhh right, cheers richie. | |
Savinforcorsaproject |
posted on 11th Oct 03 at 14:11 |
But with that you could get a nice lovely alpine head unit with 3 pre outs? | |
Richie |
posted on 11th Oct 03 at 14:10 |
You could use a couple of line drivers, but they are £120 each. 3 of em would cost ye £360 so if u got the cash go for it | |
kev_corsa |
posted on 11th Oct 03 at 14:07 |
or could i use a couple of line drivers? | |
kev_corsa |
posted on 11th Oct 03 at 14:06 |
im getting an Alpine CVA-1004R which has a motorised screen. | |
Richie |
posted on 11th Oct 03 at 14:06 |
Well for starters id change the stock headunit kev :P | |
Savinforcorsaproject |
posted on 11th Oct 03 at 14:02 |
2v hahah that a joke. | |
kev_corsa |
posted on 11th Oct 03 at 13:57 |
Cheers guys | |
TOMAS |
posted on 11th Oct 03 at 11:55 |
A line driver boosts signal voltage. If you have one pre-out then you can boost it to 4v and split it so its 2 x 2v for exampe. You can boost it and split it as many times as you want but you halve the voltage each time you split it. You can split it using RCA splitters which are cheap as chips, you dont need a line driver with one input and three outputs. Why do you want three, is it for three amps? If you have a pre-out crossover on the h.unit then it will apply for the the pre-outs if you split it (obviousley). Get yourself a pheonix TLD1 if you want quality, about £110 and up to approx 8v out of your preout.:thumbs: | |
MC Kustoms |
posted on 11th Oct 03 at 11:12 |
if the line driver has 3 outputs and 1 input it will work | |
kev_corsa |
posted on 11th Oct 03 at 11:10 |
If a headunit has only a single 2 Volt preout, is it possible to use a line driver for the and split the signal so that it works the same as having 3 preouts????? :boggle: |