|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » replacing x12xe with x14xe » Post Reply
|
RobHayes |
posted on 12th Oct 03 at 16:38 |
its out of a P reg sport so it dont have power steering. it dont matter anyway, my mate is running a c16xe using electric power steering, just didnt wire up the hydraulic pump or summat | |
MikeH |
posted on 12th Oct 03 at 16:35 |
what about power steering? It's electric in 1.2 and hydroulic in 1.4 i believe. | |
RobHayes |
posted on 12th Oct 03 at 16:20 |
thats wot i wanted to hear. dont fancy cutting my loom 2 bits cos i aint an electrician n know i wud fuck summat up leaving me with nothing | |
jr |
posted on 12th Oct 03 at 16:18 |
speak to lee mitchell/beardy about this but im sure its a plug in and play with the loom | |
RobHayes |
posted on 12th Oct 03 at 16:15 |
it aint really the engine mounting that im worried about, its the wiring up of the engine. calidus has just fitted a c16xe into his SXi and he had 2 cut up all the looms n it took well over a week to do | |
jr |
posted on 12th Oct 03 at 16:08 |
soory, it the mount on the front left hand side of the engine bay, not sure excaltly whats involved though | |
RobHayes |
posted on 12th Oct 03 at 15:53 |
well it comes wiv loom, gearbox, ecu and engine. wud i be able to get the mount from a scrapyard?? | |
jr |
posted on 11th Oct 03 at 10:01 |
need the loom and ecu of the 1.4 as well as the rear engine mount from the 1.4 | |
RobHayes |
posted on 11th Oct 03 at 09:49 |
^^ as above ^^ |