|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Can I get something straight about Induction Kits ... » Post Reply
|
Mikeboy |
posted on 11th Oct 03 at 19:02 |
Mav , did u buy your heat shield or did u make it urself ? | |
IntaCepta |
posted on 11th Oct 03 at 18:05 |
yep, my belt is also exposed, | |
MikeH |
posted on 11th Oct 03 at 17:52 |
mav: don't think i could have a shield like that on my 1.2 16v corsa B because there is no cover on my fanbelt and it would catch on it! | |
Mikeboy |
posted on 11th Oct 03 at 16:58 |
Thanks | |
mav |
posted on 10th Oct 03 at 20:44 |
I have a bfo cone. | |
broster |
posted on 10th Oct 03 at 19:37 |
u wont get the same as a viper by just sealin off a normal induction kit, this is taken from their ad | |
Mikeboy |
posted on 10th Oct 03 at 19:20 |
Cool. | |
MikeH |
posted on 10th Oct 03 at 17:51 |
If you seal an induction kit... you basically get a Viper clone.. and hence the best performance. | |
M4tt |
posted on 10th Oct 03 at 17:42 |
i've got a flexible pipe connected to the main entry of the box and the car picks up so much better than the standard air intake. | |
Mikeboy |
posted on 10th Oct 03 at 17:28 |
cool :D Now I quite like the idea of that, seems like a real modification more so than a bodge ! | |
ffls |
posted on 10th Oct 03 at 16:34 |
Make a 50 mm hole in the box and fit a pipe with to feed cold air. Fit a 80 mm flexible pipe to feed the main entry of the air box picking air from the front grill. | |
Mikeboy |
posted on 10th Oct 03 at 16:30 |
nice one | |
broster |
posted on 10th Oct 03 at 15:04 |
i believe that if u make a good enougth shield then put a nice cold air feed to it then it shud out perform a drilled air box. | |
corsa-sxi |
posted on 10th Oct 03 at 15:02 |
well if ya drill box to the wing side, it does suck more air in right? | |
Gambit |
posted on 10th Oct 03 at 14:45 |
obviously something that sucks only cold air is gonna be better than a drilled airbox | |
Luke1.4 |
posted on 10th Oct 03 at 14:44 |
My k+n works fine but it didnt b4 i made a heatshield, my car would nearly stall as i set off from traffic lights. I think that the drilled airbox does out perform induction kits on performance but i wouldnt expect it to be a gr8 amount, if noticed at all. Induction kits sound gr8 but can perform poor when the engine bay gets hot | |
Mikeboy |
posted on 10th Oct 03 at 14:28 |
? |