|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » 35mm drop on 195/50/R15 » Post Reply
|
whitter45 |
posted on 13th Oct 03 at 09:35 |
i have just gone 60mm on 195/50 tyres. it is very low at the rear and i have had to grind away my arches a bit | |
Savinforcorsaproject |
posted on 13th Oct 03 at 08:10 |
Blistin kit make sure when u lower it u get shocks spring and dampners | |
big eck |
posted on 13th Oct 03 at 08:07 |
You could buy 45 series tyres that would help lowering it that extra wee bit. | |
keithSRi |
posted on 13th Oct 03 at 08:04 |
so no chance of lowering then not even with lower profile tyres? | |
keithSRi |
posted on 12th Oct 03 at 15:44 |
dam it, looks like its window tints and smoked headlights instead...:( | |
Cybermonkey |
posted on 12th Oct 03 at 15:08 |
i think the 35 might well be the offset. If it is, forget lowering! 4 100 is the PCD. | |
keithSRi |
posted on 12th Oct 03 at 14:45 |
also anyone got a pic of a carabic blue corsa with smoke headlights? | |
keithSRi |
posted on 12th Oct 03 at 13:08 |
just had 1 of my alloys off and these numbers were on the rim: | |
Juni0r |
posted on 10th Oct 03 at 14:36 |
Should be a porb i ahd 15's with 45's lowered 35mm and never rubbed!! now got 17's -35mm and only rub with people in the back! | |
Gambit |
posted on 10th Oct 03 at 14:33 |
just take the wheel off, it'll take about 10mins tops!! | |
keithSRi |
posted on 10th Oct 03 at 14:23 |
ill just get them then, 35mm will do, any recomendations? | |
and-m |
posted on 10th Oct 03 at 14:07 |
im fine lowered 40mm on 195/50/15s offset ET46, never scrubbed with 4 up or a STACK of bathroom tiles in the boot, top of tyre was well under the arch :) | |
cobra148 |
posted on 10th Oct 03 at 13:24 |
Your right, TSW's maximum offset for 15" wheels is ET40 | |
Daimo B |
posted on 10th Oct 03 at 13:13 |
I think they will be an et40 max of et42. | |
Gambit |
posted on 10th Oct 03 at 13:09 |
welll take a wheel of and find out the offset, it'll be stamped on the bolt face of the wheel | |
keithSRi |
posted on 10th Oct 03 at 13:02 |
Will i get away with a 35mm with 195/50 R15 tyres? |